Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Two green SODIMM modules with black chips and gold contacts

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR3 1333 PC3-10600 204-Pin SODIMM POSIFLEX XT-5315 memory upgrade

SKU CH-NBYB-0QYFF

A 16 GB DDR3 1333 SODIMM kit built for POSIFLEX XT-5315 point-of-sale terminals

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 16 GB kit (2 x 8 GB) for POS terminals
  • DDR3 1333 MHz PC3-10600 speed rating
  • 204-pin SODIMM fits POSIFLEX XT-5315
  • CL9 latency with 1.50 V operation
  • Major OEM chips tested under load

POSIFLEX XT-5315 DDR3 SODIMM Kit

This 16GB kit contains two 8GB DDR3 1333 PC3-10600 SODIMM modules built for the POSIFLEX XT-5315 JIVA foldable 15-inch terminal. Each stick runs at 1.35V with CL9 latency and uses a 2Rx8 organisation. The unbuffered non-ECC design matches the original system specification.

POS Terminal Upgrade Buyers

The kit suits technicians maintaining or upgrading the named POSIFLEX terminal where 204-pin DDR3 SODIMM slots are present. It will not fit systems that require registered or ECC modules, nor boards limited to a single rank per channel. Buyers needing higher capacities per slot or a different voltage should verify their motherboard documentation first.

204-Pin DDR3 1333 Compatibility

The decisive specification is the 204-pin DDR3 SODIMM form factor operating at 1333 MT/s with 1.35V supply. Only systems that accept this exact pin count, voltage and speed will recognise both 8GB modules without configuration changes.

Privalumai

  • 16 GB kit (2 x 8 GB) for POS terminals
  • DDR3 1333 MHz PC3-10600 speed rating
  • 204-pin SODIMM fits POSIFLEX XT-5315
  • CL9 latency with 1.50 V operation
  • Major OEM chips tested under load

Specifikacijos

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K2
Capacity16GB (2 x 8GB)
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

Klausimai apie šią prekę

How much heat and power does the 1.35 V DDR3 1333 kit draw when the POS terminal runs continuously?

Each module operates at 1.35 V with no heat spreader, so power draw stays low and passive cooling inside the XT-5315 chassis is sufficient for all-day operation.

What must the POSIFLEX XT-5315 already have for this 204-pin SODIMM kit to work?

The terminal needs two free DDR3 SODIMM slots that accept 2Rx8 unbuffered non-ECC modules at PC3-10600 speed.

Will the CL9 16 GB kit run stably alongside any original 4 GB or 8 GB sticks I keep in the JIVA terminal?

Yes, the memory will down-clock to match the slowest installed module and the XT-5315 chipset handles mixed densities without errors.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.