BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00276732BTC
Skladem
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR3 1333 PC3-10600 204-Pin SODIMM POSIFLEX XT-5315 memory upgrade
A 16 GB DDR3 1333 SODIMM kit built for POSIFLEX XT-5315 point-of-sale terminals
- Capacity16GB (2 x 8GB)
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- 16 GB kit (2 x 8 GB) for POS terminals
- DDR3 1333 MHz PC3-10600 speed rating
- 204-pin SODIMM fits POSIFLEX XT-5315
- CL9 latency with 1.50 V operation
- Major OEM chips tested under load
POSIFLEX XT-5315 DDR3 SODIMM Kit
This 16GB kit contains two 8GB DDR3 1333 PC3-10600 SODIMM modules built for the POSIFLEX XT-5315 JIVA foldable 15-inch terminal. Each stick runs at 1.35V with CL9 latency and uses a 2Rx8 organisation. The unbuffered non-ECC design matches the original system specification.
POS Terminal Upgrade Buyers
The kit suits technicians maintaining or upgrading the named POSIFLEX terminal where 204-pin DDR3 SODIMM slots are present. It will not fit systems that require registered or ECC modules, nor boards limited to a single rank per channel. Buyers needing higher capacities per slot or a different voltage should verify their motherboard documentation first.
204-Pin DDR3 1333 Compatibility
The decisive specification is the 204-pin DDR3 SODIMM form factor operating at 1333 MT/s with 1.35V supply. Only systems that accept this exact pin count, voltage and speed will recognise both 8GB modules without configuration changes.
Přednosti
- 16 GB kit (2 x 8 GB) for POS terminals
- DDR3 1333 MHz PC3-10600 speed rating
- 204-pin SODIMM fits POSIFLEX XT-5315
- CL9 latency with 1.50 V operation
- Major OEM chips tested under load
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT |
Otázky k tomuto produktu
How much heat and power does the 1.35 V DDR3 1333 kit draw when the POS terminal runs continuously?
Each module operates at 1.35 V with no heat spreader, so power draw stays low and passive cooling inside the XT-5315 chassis is sufficient for all-day operation.
What must the POSIFLEX XT-5315 already have for this 204-pin SODIMM kit to work?
The terminal needs two free DDR3 SODIMM slots that accept 2Rx8 unbuffered non-ECC modules at PC3-10600 speed.
Will the CL9 16 GB kit run stably alongside any original 4 GB or 8 GB sticks I keep in the JIVA terminal?
Yes, the memory will down-clock to match the slowest installed module and the XT-5315 chipset handles mixed densities without errors.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
