Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Two green DDR4 SODIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2133 PC4-17000 CL15 2Rx8 1.2V 260-pin SODIMM for POSIFLEX RT-5016E memory upgrade

SKU CH-MD99-NQB1R

A 16 GB DDR4 SODIMM kit running at 2133 MHz with CL15 latency for the POSIFLEX RT-5016E terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB kit expands terminal memory for smoother multitasking
  • DDR4 2133 speed matches POSIFLEX RT-5016E requirements
  • CL15 latency supports responsive point-of-sale operation
  • 2 V modules reduce power draw in always-on kiosks
  • 260-pin SODIMM form factor fits the terminal’s memory slots

POSIFLEX RT-5016E memory kit

This 16GB DDR4 SODIMM kit is built for the POSIFLEX RT-5016E terminal. It contains two 8GB modules that run at 2133MHz with CL15 latency. The kit targets IT teams maintaining point-of-sale or kiosk hardware that requires matched, non-ECC memory.

Verify slot count and voltage

Confirm the terminal has two free 260-pin SODIMM slots and that the board accepts 1.2V DDR4 modules. The kit is unbuffered and non-ECC, so the system must not require registered or error-correcting memory. Check the service manual for the maximum supported capacity per slot.

Matched pair for dual-channel operation

Installing both modules together enables dual-channel bandwidth on compatible boards. The low-profile design fits tight chassis without a heat spreader. The kit frees you from mixing loose sticks of different rank or speed, which can cause instability in commercial terminals.

Privalumai

  • 16 GB kit expands terminal memory for smoother multitasking
  • DDR4 2133 speed matches POSIFLEX RT-5016E requirements
  • CL15 latency supports responsive point-of-sale operation
  • 2 V modules reduce power draw in always-on kiosks
  • 260-pin SODIMM form factor fits the terminal’s memory slots

Specifikacijos

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM
Part NumberMS17000-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL15
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM KIT

Klausimai apie šią prekę

What comes in the box and do I need to buy anything else for the POSIFLEX RT-5016E?

The kit includes two 8 GB DDR4 2133 SODIMM modules totalling 16 GB. No extra parts or cables are required for installation.

Should I pick the CL15 2133 MHz kit or a different speed for the RT-5016E?

The POSIFLEX RT-5016E is qualified for DDR4 2133 CL15 1.20 V modules; this kit matches that specification exactly.

What does the 2133 MHz rating mean once the modules are installed in the terminal?

The memory will run at 2133 MT/s with CL15 latency at 1.20 V, delivering the rated PC4-17000 bandwidth inside the RT-5016E.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.