暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR4 SODIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2133 PC4-17000 CL15 2Rx8 1.2V 260-pin SODIMM for POSIFLEX RT-5016E memory upgrade

SKU CH-MD99-NQB1R

A 16 GB DDR4 SODIMM kit running at 2133 MHz with CL15 latency for the POSIFLEX RT-5016E terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB kit expands terminal memory for smoother multitasking
  • DDR4 2133 speed matches POSIFLEX RT-5016E requirements
  • CL15 latency supports responsive point-of-sale operation
  • 2 V modules reduce power draw in always-on kiosks
  • 260-pin SODIMM form factor fits the terminal’s memory slots

POSIFLEX RT-5016E memory kit

This 16GB DDR4 SODIMM kit is built for the POSIFLEX RT-5016E terminal. It contains two 8GB modules that run at 2133MHz with CL15 latency. The kit targets IT teams maintaining point-of-sale or kiosk hardware that requires matched, non-ECC memory.

Verify slot count and voltage

Confirm the terminal has two free 260-pin SODIMM slots and that the board accepts 1.2V DDR4 modules. The kit is unbuffered and non-ECC, so the system must not require registered or error-correcting memory. Check the service manual for the maximum supported capacity per slot.

Matched pair for dual-channel operation

Installing both modules together enables dual-channel bandwidth on compatible boards. The low-profile design fits tight chassis without a heat spreader. The kit frees you from mixing loose sticks of different rank or speed, which can cause instability in commercial terminals.

特長

  • 16 GB kit expands terminal memory for smoother multitasking
  • DDR4 2133 speed matches POSIFLEX RT-5016E requirements
  • CL15 latency supports responsive point-of-sale operation
  • 2 V modules reduce power draw in always-on kiosks
  • 260-pin SODIMM form factor fits the terminal’s memory slots

仕様

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM
Part NumberMS17000-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL15
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM KIT

この商品に関する質問

What comes in the box and do I need to buy anything else for the POSIFLEX RT-5016E?

The kit includes two 8 GB DDR4 2133 SODIMM modules totalling 16 GB. No extra parts or cables are required for installation.

Should I pick the CL15 2133 MHz kit or a different speed for the RT-5016E?

The POSIFLEX RT-5016E is qualified for DDR4 2133 CL15 1.20 V modules; this kit matches that specification exactly.

What does the 2133 MHz rating mean once the modules are installed in the terminal?

The memory will run at 2133 MT/s with CL15 latency at 1.20 V, delivering the rated PC4-17000 bandwidth inside the RT-5016E.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。