Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Four green circuit boards with black memory chips, no heat spreaders, 288 gold pins each

NEMIX RAM

NEMIX RAM 192GB (4×48GB) DDR5 5600 CL46 ECC UDIMM memory upgrade

SKU CH-V54H-AH8G0

192GB DDR5 ECC UDIMM kit at 5600MHz CL46 for Supermicro H13SRD-F/H13SRE-F motherboards

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 4X48GB

  • 192 GB total capacity from four 48 GB modules for large workloads
  • DDR5 5600 speed with CL46 latency matches board timing
  • ECC protection corrects single-bit errors to prevent data corruption
  • 1 V operation at standard DDR5 voltage for efficiency
  • 288-pin UDIMM form factor fits Supermicro H13SRD-F/H13SRE-F motherboards

Exact-match upgrade for Supermicro workstations

This 192GB kit (4×48GB) DDR5 5600 PC5-44800 ECC UDIMM is built to the precise rank, voltage and timing the Supermicro H13SRD-F and H13SRE-F motherboards expect. Each 2Rx8 module runs at 1.1V with CL46 latency and installs in the 288-pin unbuffered slots those boards require. It is not for systems that need registered RDIMMs, SODIMMs or a different DDR generation.

Thermals noise and power draw

Operating at the standard 1.1V DDR5 voltage, the modules draw minimal power and run without a heat spreader. Passive cooling relies on normal chassis airflow, so the kit adds no fan noise and creates no measurable thermal load beyond what the memory controller already budgets for at 5600 MT/s.

What the bundle changes

The four-module pack fills the board's validated population order in one purchase, removing the guesswork of mixing loose sticks. ECC on-the-fly error correction stops silent data corruption and unplanned reboots, while lifetime replacement coverage and free US-based technical support back the installation long term.

Privalumai

  • 192 GB total capacity from four 48 GB modules for large workloads
  • DDR5 5600 speed with CL46 latency matches board timing
  • ECC protection corrects single-bit errors to prevent data corruption
  • 1 V operation at standard DDR5 voltage for efficiency
  • 288-pin UDIMM form factor fits Supermicro H13SRD-F/H13SRE-F motherboards

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How do I install the 4×48GB DDR5 5600 CL46 ECC UDIMM kit into my Supermicro H13SRD-F, and which slot order is the common mistake?

Populate all four 288-pin UDIMM slots following the motherboard manual's population sequence; the usual error is skipping the prescribed order, which prevents the 192GB kit from running at 5600 MT/s.

What maintenance or replacement will the 2Rx8 ECC modules need over time?

No scheduled maintenance is required; if a module fails, replace it with another DDR5 5600 1.1V CL46 2Rx8 ECC UDIMM of matching capacity to keep error-correction and population rules intact.

What limit appears first when the 192GB kit runs sustained workloads at 5600 MT/s?

The DDR5 5600 CL46 timing and 1.1V voltage set the stability ceiling; prolonged heavy use stays within spec as long as the motherboard's memory controller and cooling meet the rated 5600 MT/s operation.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.