暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green circuit boards with black memory chips, no heat spreaders, 288 gold pins each

NEMIX RAM

NEMIX RAM 192GB (4×48GB) DDR5 5600 CL46 ECC UDIMM memory upgrade

SKU CH-V54H-AH8G0

192GB DDR5 ECC UDIMM kit at 5600MHz CL46 for Supermicro H13SRD-F/H13SRE-F motherboards

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 4X48GB

  • 192 GB total capacity from four 48 GB modules for large workloads
  • DDR5 5600 speed with CL46 latency matches board timing
  • ECC protection corrects single-bit errors to prevent data corruption
  • 1 V operation at standard DDR5 voltage for efficiency
  • 288-pin UDIMM form factor fits Supermicro H13SRD-F/H13SRE-F motherboards

Exact-match upgrade for Supermicro workstations

This 192GB kit (4×48GB) DDR5 5600 PC5-44800 ECC UDIMM is built to the precise rank, voltage and timing the Supermicro H13SRD-F and H13SRE-F motherboards expect. Each 2Rx8 module runs at 1.1V with CL46 latency and installs in the 288-pin unbuffered slots those boards require. It is not for systems that need registered RDIMMs, SODIMMs or a different DDR generation.

Thermals noise and power draw

Operating at the standard 1.1V DDR5 voltage, the modules draw minimal power and run without a heat spreader. Passive cooling relies on normal chassis airflow, so the kit adds no fan noise and creates no measurable thermal load beyond what the memory controller already budgets for at 5600 MT/s.

What the bundle changes

The four-module pack fills the board's validated population order in one purchase, removing the guesswork of mixing loose sticks. ECC on-the-fly error correction stops silent data corruption and unplanned reboots, while lifetime replacement coverage and free US-based technical support back the installation long term.

特長

  • 192 GB total capacity from four 48 GB modules for large workloads
  • DDR5 5600 speed with CL46 latency matches board timing
  • ECC protection corrects single-bit errors to prevent data corruption
  • 1 V operation at standard DDR5 voltage for efficiency
  • 288-pin UDIMM form factor fits Supermicro H13SRD-F/H13SRE-F motherboards

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the 4×48GB DDR5 5600 CL46 ECC UDIMM kit into my Supermicro H13SRD-F, and which slot order is the common mistake?

Populate all four 288-pin UDIMM slots following the motherboard manual's population sequence; the usual error is skipping the prescribed order, which prevents the 192GB kit from running at 5600 MT/s.

What maintenance or replacement will the 2Rx8 ECC modules need over time?

No scheduled maintenance is required; if a module fails, replace it with another DDR5 5600 1.1V CL46 2Rx8 ECC UDIMM of matching capacity to keep error-correction and population rules intact.

What limit appears first when the 192GB kit runs sustained workloads at 5600 MT/s?

The DDR5 5600 CL46 timing and 1.1V voltage set the stability ceiling; prolonged heavy use stays within spec as long as the motherboard's memory controller and cooling meet the rated 5600 MT/s operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。