暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 UDIMM modules without heat spreaders, 32GB kit

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 ECC UDIMM Supermicro X14SAE memory upgrade

SKU CH-CVSQ-57AWW

A 32GB kit of two 16GB DDR5 5600 ECC UDIMMs at CL46 and 1.1V for Supermicro X14SAE motherboards

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

  • 32 GB capacity from two 16 GB modules expands system memory for larger workloads
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth for the Supermicro X14SAE
  • ECC protection detects and corrects single-bit errors to prevent silent data corruption
  • Unbuffered 288-pin UDIMM at 1.1 V matches the motherboard's required form factor and voltage
  • Built with major OEM chips from Samsung Micron or Hynix for consistent quality

Exact-match DDR5 kit for Supermicro X14SAE

This 32 GB kit contains two 16 GB DDR5 ECC UDIMMs rated at 5600 MT/s with CL46 latency and 1.1 V operation. It is built for the Supermicro X14SAE motherboard and matches the board's required rank, voltage and timing so the memory controller recognises full capacity at rated speed.

DDR5 ECC UDIMM limits and population rules

The board accepts only 288-pin unbuffered ECC UDIMMs; RDIMMs or SODIMMs will not fit or function. Maximum capacity and supported population order depend on the specific motherboard revision and BIOS, so the manual must be consulted before purchase.

Straightforward UDIMM installation

Modules key into the 288-pin slots in the sequence the manual specifies; deviating from that order can leave capacity unrecognised. Mixing ranks or voltages, or omitting the ECC requirement, are the usual causes of boot failure or silent data errors.

特長

  • 32 GB capacity from two 16 GB modules expands system memory for larger workloads
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth for the Supermicro X14SAE
  • ECC protection detects and corrects single-bit errors to prevent silent data corruption
  • Unbuffered 288-pin UDIMM at 1.1 V matches the motherboard's required form factor and voltage
  • Built with major OEM chips from Samsung Micron or Hynix for consistent quality

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I choose the 32 GB kit or look for a different capacity?

This kit provides exactly 32 GB as two 16 GB modules, the capacity Supermicro specifies for the X14SAE when populating both DDR5 slots.

What does the 5600 MHz rating mean once the modules are installed in the X14SAE?

The memory controller will run the kit at DDR5 5600 (PC5-44800) with CL46 latency at the standard 1.10 V, delivering the rated throughput without manual tuning.

Is the 288-pin ECC UDIMM interface the one the X14SAE requires, and does it limit speed?

Yes, the board needs 288-pin unbuffered ECC UDIMMs; this kit matches that form factor and runs at the full DDR5 5600 speed the platform supports.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。