저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 ECC UDIMM Supermicro X14SAE memory upgrade

SKU CH-CVSQ-57AWW

A 32GB kit of two 16GB DDR5 5600 ECC UDIMMs at CL46 and 1.1V for Supermicro X14SAE motherboards

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 32 GB capacity from two 16 GB modules expands system memory for larger workloads
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth for the Supermicro X14SAE
  • ECC protection detects and corrects single-bit errors to prevent silent data corruption
  • Unbuffered 288-pin UDIMM at 1.1 V matches the motherboard's required form factor and voltage
  • Built with major OEM chips from Samsung Micron or Hynix for consistent quality

Exact-match DDR5 kit for Supermicro X14SAE

This 32 GB kit contains two 16 GB DDR5 ECC UDIMMs rated at 5600 MT/s with CL46 latency and 1.1 V operation. It is built for the Supermicro X14SAE motherboard and matches the board's required rank, voltage and timing so the memory controller recognises full capacity at rated speed.

DDR5 ECC UDIMM limits and population rules

The board accepts only 288-pin unbuffered ECC UDIMMs; RDIMMs or SODIMMs will not fit or function. Maximum capacity and supported population order depend on the specific motherboard revision and BIOS, so the manual must be consulted before purchase.

Straightforward UDIMM installation

Modules key into the 288-pin slots in the sequence the manual specifies; deviating from that order can leave capacity unrecognised. Mixing ranks or voltages, or omitting the ECC requirement, are the usual causes of boot failure or silent data errors.

주요 특징

  • 32 GB capacity from two 16 GB modules expands system memory for larger workloads
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth for the Supermicro X14SAE
  • ECC protection detects and corrects single-bit errors to prevent silent data corruption
  • Unbuffered 288-pin UDIMM at 1.1 V matches the motherboard's required form factor and voltage
  • Built with major OEM chips from Samsung Micron or Hynix for consistent quality

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Should I choose the 32 GB kit or look for a different capacity?

This kit provides exactly 32 GB as two 16 GB modules, the capacity Supermicro specifies for the X14SAE when populating both DDR5 slots.

What does the 5600 MHz rating mean once the modules are installed in the X14SAE?

The memory controller will run the kit at DDR5 5600 (PC5-44800) with CL46 latency at the standard 1.10 V, delivering the rated throughput without manual tuning.

Is the 288-pin ECC UDIMM interface the one the X14SAE requires, and does it limit speed?

Yes, the board needs 288-pin unbuffered ECC UDIMMs; this kit matches that form factor and runs at the full DDR5 5600 speed the platform supports.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.