我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR5 UDIMM modules without heat spreaders, 32GB kit

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 ECC UDIMM Supermicro X14SAE memory upgrade

SKU CH-CVSQ-57AWW

A 32GB kit of two 16GB DDR5 5600 ECC UDIMMs at CL46 and 1.1V for Supermicro X14SAE motherboards

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

  • 32 GB capacity from two 16 GB modules expands system memory for larger workloads
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth for the Supermicro X14SAE
  • ECC protection detects and corrects single-bit errors to prevent silent data corruption
  • Unbuffered 288-pin UDIMM at 1.1 V matches the motherboard's required form factor and voltage
  • Built with major OEM chips from Samsung Micron or Hynix for consistent quality

Exact-match DDR5 kit for Supermicro X14SAE

This 32 GB kit contains two 16 GB DDR5 ECC UDIMMs rated at 5600 MT/s with CL46 latency and 1.1 V operation. It is built for the Supermicro X14SAE motherboard and matches the board's required rank, voltage and timing so the memory controller recognises full capacity at rated speed.

DDR5 ECC UDIMM limits and population rules

The board accepts only 288-pin unbuffered ECC UDIMMs; RDIMMs or SODIMMs will not fit or function. Maximum capacity and supported population order depend on the specific motherboard revision and BIOS, so the manual must be consulted before purchase.

Straightforward UDIMM installation

Modules key into the 288-pin slots in the sequence the manual specifies; deviating from that order can leave capacity unrecognised. Mixing ranks or voltages, or omitting the ECC requirement, are the usual causes of boot failure or silent data errors.

商品特色

  • 32 GB capacity from two 16 GB modules expands system memory for larger workloads
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth for the Supermicro X14SAE
  • ECC protection detects and corrects single-bit errors to prevent silent data corruption
  • Unbuffered 288-pin UDIMM at 1.1 V matches the motherboard's required form factor and voltage
  • Built with major OEM chips from Samsung Micron or Hynix for consistent quality

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Should I choose the 32 GB kit or look for a different capacity?

This kit provides exactly 32 GB as two 16 GB modules, the capacity Supermicro specifies for the X14SAE when populating both DDR5 slots.

What does the 5600 MHz rating mean once the modules are installed in the X14SAE?

The memory controller will run the kit at DDR5 5600 (PC5-44800) with CL46 latency at the standard 1.10 V, delivering the rated throughput without manual tuning.

Is the 288-pin ECC UDIMM interface the one the X14SAE requires, and does it limit speed?

Yes, the board needs 288-pin unbuffered ECC UDIMMs; this kit matches that form factor and runs at the full DDR5 5600 speed the platform supports.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。