Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green circuit board DDR5 RDIMM memory module with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR5 4800MHz CL40 2Rx8 ECC Registered RDIMM Supermicro H14SHM memory upgrade

SKU CH-SPVT-E09HX

32 GB DDR5 4800 MHz CL40 2Rx8 ECC registered RDIMM at 1.1 V for Supermicro H14SHM servers

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 32GB

Rodyti 24 daugiau konfigūracijų
  • 32 GB capacity expands server memory headroom for virtualization workloads
  • DDR5 4800 MT/s speed matches the Supermicro H14SHM memory controller specification
  • CL40 CAS latency and 1.10 V voltage deliver the exact timing the platform expects
  • 2Rx8 Registered ECC architecture enables full-slot population with single-bit error correction
  • 288-pin RDIMM form factor ensures correct physical and electrical fit in the target motherboard

Supermicro H14SHM DDR5 RDIMM Upgrade

This NEMIX RAM module is a 32GB DDR5 4800MHz PC5-38400 2Rx8 Registered ECC RDIMM built for the Supermicro H14SHM motherboard. It delivers the exact rank, voltage, and timing the board's memory controller expects for full-capacity recognition at rated speed.

Suited for Registered ECC Server Configurations

It fits administrators expanding Supermicro H14SHM systems that require 288-pin Registered ECC DDR5 modules operating at 1.1V CL40. It is not for platforms that accept only unbuffered UDIMMs or SODIMMs, nor for workloads needing non-ECC consumer memory.

2Rx8 Registered ECC at 1.1V CL40

The 2Rx8 registered ECC organization at 1.1V CL40 is the single specification that determines whether this module matches your server's qualified vendor list and population rules. Verify supported capacities and slot order in the system manual before purchase.

Privalumai

  • 32 GB capacity expands server memory headroom for virtualization workloads
  • DDR5 4800 MT/s speed matches the Supermicro H14SHM memory controller specification
  • CL40 CAS latency and 1.10 V voltage deliver the exact timing the platform expects
  • 2Rx8 Registered ECC architecture enables full-slot population with single-bit error correction
  • 288-pin RDIMM form factor ensures correct physical and electrical fit in the target motherboard

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Does my Supermicro H14SHM motherboard need to support 288-pin registered ECC DDR5 DIMMs for this module to work?

Yes, the board must accept 288-pin RDIMMs with ECC and registered buffering; the H14SHM is listed as a compatible system for this exact 32GB 4800MHz CL40 1.1V 2Rx8 kit.

Can I install this 2Rx8 registered ECC DDR5 DIMM alongside existing 1Rx8 registered ECC DDR5 modules on the same H14SHM board?

Mixing ranks is possible if the motherboard manual permits it; the H14SHM memory-population rules decide which slots can combine 2Rx8 and 1Rx8 registered ECC DDR5 DIMMs at 4800MHz.

How can I confirm the kit is running at DDR5 4800MHz CL40 1.1V with ECC active after installation?

Check the BIOS memory information or a tool like CPU-Z: it should show 4800 MT/s, CAS 40, 1.10V, registered ECC, and 32GB per module recognised.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.