Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Green circuit board DDR5 RDIMM memory module with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR5 4800MHz CL40 2Rx8 ECC Registered RDIMM Supermicro H14SHM memory upgrade

SKU CH-SPVT-E09HX

32 GB DDR5 4800 MHz CL40 2Rx8 ECC registered RDIMM at 1.1 V for Supermicro H14SHM servers

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 32GB

24 yapılandırma daha gösterin

Speed 4800MHz

  • 32 GB capacity expands server memory headroom for virtualization workloads
  • DDR5 4800 MT/s speed matches the Supermicro H14SHM memory controller specification
  • CL40 CAS latency and 1.10 V voltage deliver the exact timing the platform expects
  • 2Rx8 Registered ECC architecture enables full-slot population with single-bit error correction
  • 288-pin RDIMM form factor ensures correct physical and electrical fit in the target motherboard

Supermicro H14SHM DDR5 RDIMM Upgrade

This NEMIX RAM module is a 32GB DDR5 4800MHz PC5-38400 2Rx8 Registered ECC RDIMM built for the Supermicro H14SHM motherboard. It delivers the exact rank, voltage, and timing the board's memory controller expects for full-capacity recognition at rated speed.

Suited for Registered ECC Server Configurations

It fits administrators expanding Supermicro H14SHM systems that require 288-pin Registered ECC DDR5 modules operating at 1.1V CL40. It is not for platforms that accept only unbuffered UDIMMs or SODIMMs, nor for workloads needing non-ECC consumer memory.

2Rx8 Registered ECC at 1.1V CL40

The 2Rx8 registered ECC organization at 1.1V CL40 is the single specification that determines whether this module matches your server's qualified vendor list and population rules. Verify supported capacities and slot order in the system manual before purchase.

Öne çıkanlar

  • 32 GB capacity expands server memory headroom for virtualization workloads
  • DDR5 4800 MT/s speed matches the Supermicro H14SHM memory controller specification
  • CL40 CAS latency and 1.10 V voltage deliver the exact timing the platform expects
  • 2Rx8 Registered ECC architecture enables full-slot population with single-bit error correction
  • 288-pin RDIMM form factor ensures correct physical and electrical fit in the target motherboard

Teknik özellikler

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Does my Supermicro H14SHM motherboard need to support 288-pin registered ECC DDR5 DIMMs for this module to work?

Yes, the board must accept 288-pin RDIMMs with ECC and registered buffering; the H14SHM is listed as a compatible system for this exact 32GB 4800MHz CL40 1.1V 2Rx8 kit.

Can I install this 2Rx8 registered ECC DDR5 DIMM alongside existing 1Rx8 registered ECC DDR5 modules on the same H14SHM board?

Mixing ranks is possible if the motherboard manual permits it; the H14SHM memory-population rules decide which slots can combine 2Rx8 and 1Rx8 registered ECC DDR5 DIMMs at 4800MHz.

How can I confirm the kit is running at DDR5 4800MHz CL40 1.1V with ECC active after installation?

Check the BIOS memory information or a tool like CPU-Z: it should show 4800 MT/s, CAS 40, 1.10V, registered ECC, and 32GB per module recognised.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.