NEMIX RAM
NEMIX RAM 48GB DDR5 6400 CL52 2Rx8 1.1V ECC RDIMM Supermicro H14DSH memory upgrade
48 GB DDR5 6400 RDIMM with ECC and registered architecture, validated for Supermicro H14DSH servers
- Capacity48GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact DDR5-6400 CL52 1.10V spec matches Supermicro H14DSH memory controller for full-speed operation
- Registered ECC RDIMM architecture offloads controller load and corrects single-bit errors on the fly
- 2Rx8 288-pin form factor fits H14DSH DIMM slots and supports full population rules
- 48GB capacity per module scales server memory without exceeding board limits
- Lifetime replacement coverage with US-based technical support included
48 GB DDR5-6400 ECC RDIMM for Supermicro H14DSH
This 48 GB DDR5 6400 (PC5-51200) registered ECC module is built for the Supermicro H14DSH motherboard. It runs at 1.1 V with CL52 latency and a 2Rx8 organisation. The 288-pin RDIMM form factor matches the board's registered-memory requirement. It targets administrators who need exact-spec memory that the controller recognises at full capacity and rated speed.
Exact rank, voltage and timing match
The module delivers the precise 2Rx8 rank structure, 1.10 V operating voltage and CL52 timing the H14DSH memory controller expects. Registered architecture offloads the controller so every populated slot runs at full capacity. On-die ECC catches and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads.
Install by the manual's population rules
Installation follows the motherboard manual's approved DIMM population order; the board will not boot if modules are seated in an unsupported sequence. No heat spreader is fitted, so clearance is standard for 288-pin RDIMM slots. Buyers who need a different capacity, a UDIMM form factor or non-ECC memory cannot use this kit.
Privalumai
- Exact DDR5-6400 CL52 1.10V spec matches Supermicro H14DSH memory controller for full-speed operation
- Registered ECC RDIMM architecture offloads controller load and corrects single-bit errors on the fly
- 2Rx8 288-pin form factor fits H14DSH DIMM slots and supports full population rules
- 48GB capacity per module scales server memory without exceeding board limits
- Lifetime replacement coverage with US-based technical support included
Specifikacijos
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K1 |
| Capacity | 48GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Klausimai apie šią prekę
Will the 48 GB DDR5 RDIMM need any periodic maintenance or component replacement during its service life?
No routine maintenance is required for the DDR5 RDIMM itself; the module has no moving parts or heat spreader, and ECC with registered buffering corrects single-bit errors on the fly to prevent silent data corruption.
What is the first limit reached when the 48 GB DDR5 6400 CL52 kit runs under sustained load?
The module operates at the JEDEC-standard 1.1 V and CL52 latency; without a heat spreader, the DRAM temperature will hit its thermal throttle point before voltage or timing limits are reached.
How much power does the 48 GB DDR5 6400 CL52 RDIMM draw and how hot does it get when the server runs all day?
At 1.1 V the kit draws only the power defined by the DDR5 6400 specification, and with no heat spreader the chips rely on chassis airflow to stay within operating temperature.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.



