Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green printed circuit board with gold contacts and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 48GB DDR5 6400 CL52 2Rx8 1.1V ECC RDIMM Supermicro H14DSH memory upgrade

SKU CH-AM4S-SM7FS

48 GB DDR5 6400 RDIMM with ECC and registered architecture, validated for Supermicro H14DSH servers

  • Capacity48GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • Exact DDR5-6400 CL52 1.10V spec matches Supermicro H14DSH memory controller for full-speed operation
  • Registered ECC RDIMM architecture offloads controller load and corrects single-bit errors on the fly
  • 2Rx8 288-pin form factor fits H14DSH DIMM slots and supports full population rules
  • 48GB capacity per module scales server memory without exceeding board limits
  • Lifetime replacement coverage with US-based technical support included

48 GB DDR5-6400 ECC RDIMM for Supermicro H14DSH

This 48 GB DDR5 6400 (PC5-51200) registered ECC module is built for the Supermicro H14DSH motherboard. It runs at 1.1 V with CL52 latency and a 2Rx8 organisation. The 288-pin RDIMM form factor matches the board's registered-memory requirement. It targets administrators who need exact-spec memory that the controller recognises at full capacity and rated speed.

Exact rank, voltage and timing match

The module delivers the precise 2Rx8 rank structure, 1.10 V operating voltage and CL52 timing the H14DSH memory controller expects. Registered architecture offloads the controller so every populated slot runs at full capacity. On-die ECC catches and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads.

Install by the manual's population rules

Installation follows the motherboard manual's approved DIMM population order; the board will not boot if modules are seated in an unsupported sequence. No heat spreader is fitted, so clearance is standard for 288-pin RDIMM slots. Buyers who need a different capacity, a UDIMM form factor or non-ECC memory cannot use this kit.

Přednosti

  • Exact DDR5-6400 CL52 1.10V spec matches Supermicro H14DSH memory controller for full-speed operation
  • Registered ECC RDIMM architecture offloads controller load and corrects single-bit errors on the fly
  • 2Rx8 288-pin form factor fits H14DSH DIMM slots and supports full population rules
  • 48GB capacity per module scales server memory without exceeding board limits
  • Lifetime replacement coverage with US-based technical support included

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-4828K1
Capacity48GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Otázky k tomuto produktu

Will the 48 GB DDR5 RDIMM need any periodic maintenance or component replacement during its service life?

No routine maintenance is required for the DDR5 RDIMM itself; the module has no moving parts or heat spreader, and ECC with registered buffering corrects single-bit errors on the fly to prevent silent data corruption.

What is the first limit reached when the 48 GB DDR5 6400 CL52 kit runs under sustained load?

The module operates at the JEDEC-standard 1.1 V and CL52 latency; without a heat spreader, the DRAM temperature will hit its thermal throttle point before voltage or timing limits are reached.

How much power does the 48 GB DDR5 6400 CL52 RDIMM draw and how hot does it get when the server runs all day?

At 1.1 V the kit draws only the power defined by the DDR5 6400 specification, and with no heat spreader the chips rely on chassis airflow to stay within operating temperature.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.