Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 2Rx8 SODIMM POSIFLEX PS-3515 memory upgrade

SKU CH-AAR3-EC9VG

A 4 GB DDR3 SODIMM module running at 1333 MHz with CL9 latency, built for the POSIFLEX PS-3515 terminal

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX PS-3515 terminals
  • 4GB DDR3 1333MHz PC3-10600 SODIMM module
  • Low voltage 1.35V operation for efficiency
  • 2Rx8 dual-rank unbuffered non-ECC design
  • Major OEM chips ensure system stability

POSIFLEX PS-3515 memory upgrade

This 4 GB DDR3 SODIMM is built specifically for the POSIFLEX PS-3515 fanless point-of-sale terminal. It targets retailers and system integrators who need a direct-fit replacement without compatibility guesswork. The module installs in minutes using the terminal's standard 204-pin slot.

CL9 1.35 V low-voltage operation

Running at CL9 latency and 1.35 V, the module reduces power draw and heat inside the fanless chassis. Major-brand Samsung, Micron or Hynix ICs are rigorously stress-tested under load to ensure stability in continuous retail environments. No extra software or drivers are required.

4 GB single-module capacity

One 4 GB stick fills a single slot and handles typical POS workloads such as transaction processing, inventory lookup and peripheral management. Capacity tops out at 4 GB per module, so terminals needing more memory must populate additional slots if the board provides them.

Privalumai

  • Designed for POSIFLEX PS-3515 terminals
  • 4GB DDR3 1333MHz PC3-10600 SODIMM module
  • Low voltage 1.35V operation for efficiency
  • 2Rx8 dual-rank unbuffered non-ECC design
  • Major OEM chips ensure system stability

Specifikacijos

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Klausimai apie šią prekę

Will the 2Rx8 SODIMM need replacement if the POS terminal runs continuous shifts?

The module is built with major OEM chips and stress-tested under load for system stability, so it is intended to last the terminal's service life without planned replacement.

What limit appears first when the PS-3515 runs sustained workloads on this 1333 MHz CL9 module?

The DDR3 1333 bus and CL9 latency set the throughput ceiling, so memory bandwidth saturates before the 4 GB capacity or 1.35 V power envelope becomes the bottleneck.

How much heat and noise does the 1.35 V unbuffered SODIMM add during all-day operation?

With no heat spreader and a low 1.35 V operating voltage, the stick adds minimal thermal load and zero acoustic noise to the fanless PS-3515 chassis.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.