SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 USD
0.00502603BTC
În stoc
NEMIX RAM
NEMIX RAM 4GB DDR3 1333 2Rx8 SODIMM POSIFLEX PS-3515 memory upgrade
A 4 GB DDR3 SODIMM module running at 1333 MHz with CL9 latency, built for the POSIFLEX PS-3515 terminal
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- Designed for POSIFLEX PS-3515 terminals
- 4GB DDR3 1333MHz PC3-10600 SODIMM module
- Low voltage 1.35V operation for efficiency
- 2Rx8 dual-rank unbuffered non-ECC design
- Major OEM chips ensure system stability
POSIFLEX PS-3515 memory upgrade
This 4 GB DDR3 SODIMM is built specifically for the POSIFLEX PS-3515 fanless point-of-sale terminal. It targets retailers and system integrators who need a direct-fit replacement without compatibility guesswork. The module installs in minutes using the terminal's standard 204-pin slot.
CL9 1.35 V low-voltage operation
Running at CL9 latency and 1.35 V, the module reduces power draw and heat inside the fanless chassis. Major-brand Samsung, Micron or Hynix ICs are rigorously stress-tested under load to ensure stability in continuous retail environments. No extra software or drivers are required.
4 GB single-module capacity
One 4 GB stick fills a single slot and handles typical POS workloads such as transaction processing, inventory lookup and peripheral management. Capacity tops out at 4 GB per module, so terminals needing more memory must populate additional slots if the board provides them.
Puncte forte
- Designed for POSIFLEX PS-3515 terminals
- 4GB DDR3 1333MHz PC3-10600 SODIMM module
- Low voltage 1.35V operation for efficiency
- 2Rx8 dual-rank unbuffered non-ECC design
- Major OEM chips ensure system stability
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Întrebări despre acest articol
Will the 2Rx8 SODIMM need replacement if the POS terminal runs continuous shifts?
The module is built with major OEM chips and stress-tested under load for system stability, so it is intended to last the terminal's service life without planned replacement.
What limit appears first when the PS-3515 runs sustained workloads on this 1333 MHz CL9 module?
The DDR3 1333 bus and CL9 latency set the throughput ceiling, so memory bandwidth saturates before the 4 GB capacity or 1.35 V power envelope becomes the bottleneck.
How much heat and noise does the 1.35 V unbuffered SODIMM add during all-day operation?
With no heat spreader and a low 1.35 V operating voltage, the stick adds minimal thermal load and zero acoustic noise to the fanless PS-3515 chassis.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 USD
0.00096151BTC
În stoc