Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-PIN SODIMM POSIFLEX KS-7412P memory upgrade

SKU CH-BJ60-H5YW0

4 GB DDR3 SODIMM running at 1333 MHz with 1.35 V low voltage for POSIFLEX KS-7412P terminals

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 4 GB capacity expands POS terminal multitasking
  • DDR3 1333 speed matches system memory bus
  • 35 V low-voltage operation reduces power draw
  • 204-pin SODIMM form factor fits KS-7412P slot
  • 2Rx8 dual-rank organisation optimises memory density

Targeted POS Upgrade

This 4 GB DDR3 SODIMM is built for the POSIFLEX KS-7412P compact fanless terminal. It matches the system's 204-pin slot and PC3-10600 timing so the machine boots without configuration changes. IT teams handling retail or hospitality roll-outs can deploy it as a direct replacement for the original module.

Single-Module Simplicity

The package contains one 4 GB stick rated at 1.35 V with CL9 latency and 2Rx8 organisation. No extra cables, brackets or software licenses are included; the upgrade is limited to the memory itself. Installers simply open the access panel, swap the module and close the case.

Fanless-Grade Construction

Major-brand Samsung, Micron or Hynix ICs are mounted on an unbuffered, non-ECC PCB without a heat spreader. The low-profile 204-pin form factor fits the tight chassis of the KS-7412P and produces no additional acoustic load. Gold-edge contacts resist oxidation in continuous-operation environments.

Privalumai

  • 4 GB capacity expands POS terminal multitasking
  • DDR3 1333 speed matches system memory bus
  • 35 V low-voltage operation reduces power draw
  • 204-pin SODIMM form factor fits KS-7412P slot
  • 2Rx8 dual-rank organisation optimises memory density

Specifikacijos

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Klausimai apie šią prekę

Will the SODIMM slots or the 1.35V module itself need replacement in a POSIFLEX KS-7412P?

The 204-pin DDR3 SODIMM has no moving parts and is rated for continuous operation; only a capacity upgrade would prompt a swap.

What limit appears first when the KS-7412P runs this memory at full load all day?

The CL9 latency at 1333 MHz and the 4 GB capacity set the throughput ceiling before voltage or heat become factors.

How much heat or fan noise does the 1.35V 4 GB stick add to the fanless KS-7412P chassis?

Low-voltage DDR3 without a heat spreader draws minimal power, adding negligible warmth to the passively cooled terminal.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.