Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-PIN SODIMM POSIFLEX KS-7412P memory upgrade

SKU CH-BJ60-H5YW0

4 GB DDR3 SODIMM running at 1333 MHz with 1.35 V low voltage for POSIFLEX KS-7412P terminals

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 4 GB capacity expands POS terminal multitasking
  • DDR3 1333 speed matches system memory bus
  • 35 V low-voltage operation reduces power draw
  • 204-pin SODIMM form factor fits KS-7412P slot
  • 2Rx8 dual-rank organisation optimises memory density

Targeted POS Upgrade

This 4 GB DDR3 SODIMM is built for the POSIFLEX KS-7412P compact fanless terminal. It matches the system's 204-pin slot and PC3-10600 timing so the machine boots without configuration changes. IT teams handling retail or hospitality roll-outs can deploy it as a direct replacement for the original module.

Single-Module Simplicity

The package contains one 4 GB stick rated at 1.35 V with CL9 latency and 2Rx8 organisation. No extra cables, brackets or software licenses are included; the upgrade is limited to the memory itself. Installers simply open the access panel, swap the module and close the case.

Fanless-Grade Construction

Major-brand Samsung, Micron or Hynix ICs are mounted on an unbuffered, non-ECC PCB without a heat spreader. The low-profile 204-pin form factor fits the tight chassis of the KS-7412P and produces no additional acoustic load. Gold-edge contacts resist oxidation in continuous-operation environments.

Ciri-ciri utama

  • 4 GB capacity expands POS terminal multitasking
  • DDR3 1333 speed matches system memory bus
  • 35 V low-voltage operation reduces power draw
  • 204-pin SODIMM form factor fits KS-7412P slot
  • 2Rx8 dual-rank organisation optimises memory density

Spesifikasi

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Soalan tentang produk ini

Will the SODIMM slots or the 1.35V module itself need replacement in a POSIFLEX KS-7412P?

The 204-pin DDR3 SODIMM has no moving parts and is rated for continuous operation; only a capacity upgrade would prompt a swap.

What limit appears first when the KS-7412P runs this memory at full load all day?

The CL9 latency at 1333 MHz and the 4 GB capacity set the throughput ceiling before voltage or heat become factors.

How much heat or fan noise does the 1.35V 4 GB stick add to the fanless KS-7412P chassis?

Low-voltage DDR3 without a heat spreader draws minimal power, adding negligible warmth to the passively cooled terminal.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.