Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Twelve green DDR5 RDIMM modules in a row, bare circuit boards with black chips, no heat spreaders, 288-pin edge connectors visible

NEMIX RAM

NEMIX RAM 576GB 12x48GB DDR5 4800 CL40 2Rx8 ECC RDIMM Supermicro H13SSL-NT memory upgrade

SKU CH-BJ4A-3N3AA

A 576GB kit of 12 DDR5 48GB Registered ECC RDIMM modules at 4800MHz CL40 1.1V validated for the Supermicro H13SSL-NT motherboard

  • Capacity576GB (12 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 576GB 12X48GB

Rodyti 24 daugiau konfigūracijų
  • 576 GB total capacity from twelve 48 GB modules
  • DDR5 4800 speed with CL40 latency for rated server performance
  • Registered ECC design corrects single-bit errors and stabilises full population
  • 1 V operation matches the Supermicro H13SSL-NT memory controller exactly
  • 288-pin RDIMM form factor fits the board's required slot type

Exact-match server upgrade

This 576GB kit delivers twelve 48GB DDR5-4800 Registered ECC RDIMMs at 1.1V with CL40 timing. The modules are built to the precise rank, voltage and timing the Supermicro H13SSL-NT memory controller expects so the full capacity is recognised and runs at its rated PC5-38400 speed.

Who this suits and who should look elsewhere

It suits administrators populating every slot of an H13SSL-NT board with registered ECC memory for maximum capacity and error correction. Builders who need unbuffered UDIMMs, SODIMMs, lower-density modules or a different DDR generation should look elsewhere because this kit only provides 288-pin RDIMMs in a fixed twelve-module configuration.

Sustained-load behaviour

Registered architecture offloads the memory controller so all twelve slots remain stable when fully populated under continuous workloads. On-die ECC catches and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots during extended production runs.

Privalumai

  • 576 GB total capacity from twelve 48 GB modules
  • DDR5 4800 speed with CL40 latency for rated server performance
  • Registered ECC design corrects single-bit errors and stabilises full population
  • 1 V operation matches the Supermicro H13SSL-NT memory controller exactly
  • 288-pin RDIMM form factor fits the board's required slot type

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K12
Capacity576GB (12 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 12X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

What motherboard is required for this 12-module 576GB DDR5 4800 kit?

It is validated for the Supermicro H13SSL-NT motherboard, which accepts 288-pin registered DDR5 DIMMs and supports the 2Rx8 rank structure at 1.1V.

Will these registered ECC modules work if I keep older unbuffered DDR5 DIMMs in the same system?

No. Registered and unbuffered DIMMs cannot be mixed on the same motherboard; the memory controller expects one topology, so all slots must use registered modules.

How can I confirm the kit is running at its rated 4800 MT/s CL40 after installation?

Enter the BIOS or use a tool such as dmidecode to verify each slot shows 4800 MT/s, CL40, 1.1V and registered ECC status across all 12 modules.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.