We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 576GB 12x48GB DDR5 4800 CL40 2Rx8 ECC RDIMM Supermicro H13SSL-NT memory upgrade

SKU CH-BJ4A-3N3AA

A 576GB kit of 12 DDR5 48GB Registered ECC RDIMM modules at 4800MHz CL40 1.1V validated for the Supermicro H13SSL-NT motherboard

  • Capacity576GB (12 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 576 GB total capacity from twelve 48 GB modules
  • DDR5 4800 speed with CL40 latency for rated server performance
  • Registered ECC design corrects single-bit errors and stabilises full population
  • 1 V operation matches the Supermicro H13SSL-NT memory controller exactly
  • 288-pin RDIMM form factor fits the board's required slot type

Exact-match server upgrade

This 576GB kit delivers twelve 48GB DDR5-4800 Registered ECC RDIMMs at 1.1V with CL40 timing. The modules are built to the precise rank, voltage and timing the Supermicro H13SSL-NT memory controller expects so the full capacity is recognised and runs at its rated PC5-38400 speed.

Who this suits and who should look elsewhere

It suits administrators populating every slot of an H13SSL-NT board with registered ECC memory for maximum capacity and error correction. Builders who need unbuffered UDIMMs, SODIMMs, lower-density modules or a different DDR generation should look elsewhere because this kit only provides 288-pin RDIMMs in a fixed twelve-module configuration.

Sustained-load behaviour

Registered architecture offloads the memory controller so all twelve slots remain stable when fully populated under continuous workloads. On-die ECC catches and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots during extended production runs.

Highlights

  • 576 GB total capacity from twelve 48 GB modules
  • DDR5 4800 speed with CL40 latency for rated server performance
  • Registered ECC design corrects single-bit errors and stabilises full population
  • 1 V operation matches the Supermicro H13SSL-NT memory controller exactly
  • 288-pin RDIMM form factor fits the board's required slot type

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K12
Capacity576GB (12 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 12X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What motherboard is required for this 12-module 576GB DDR5 4800 kit?

It is validated for the Supermicro H13SSL-NT motherboard, which accepts 288-pin registered DDR5 DIMMs and supports the 2Rx8 rank structure at 1.1V.

Will these registered ECC modules work if I keep older unbuffered DDR5 DIMMs in the same system?

No. Registered and unbuffered DIMMs cannot be mixed on the same motherboard; the memory controller expects one topology, so all slots must use registered modules.

How can I confirm the kit is running at its rated 4800 MT/s CL40 after installation?

Enter the BIOS or use a tool such as dmidecode to verify each slot shows 4800 MT/s, CL40, 1.1V and registered ECC status across all 12 modules.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.