Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Two green circuit boards with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 5600 CL46 2Rx8 1.1V UDIMM Supermicro X13SAQ memory upgrade

SKU CH-0T2Y-60PZ3

A 64 GB DDR5 kit of two 32 GB UDIMMs running at 5600 MT/s with CL46 latency, 1.1 V operation and 2Rx8 rank, verified for the Supermicro X13SAQ motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 64GB 2X32GB

  • 64 GB kit lets your Supermicro X13SAQ run at full DDR5-5600 speed
  • CL46 timing and 1.10 V match the board's memory controller for stable operation
  • 2Rx8 dual-rank organisation maximises bandwidth across the two 32 GB modules
  • 288-pin UDIMM form factor fits the X13SAQ slots without adapters or ECC modules
  • Major OEM Samsung, Micron or Hynix chips tested at rated specifications for reliability

Exact-match upgrade for Supermicro X13SAQ

This 64GB kit delivers two 32GB DDR5 5600 CL46 2Rx8 UDIMMs at 1.1V. It is built for the Supermicro X13SAQ motherboard and matches the board's memory-controller requirements for rank, voltage and timing so the full capacity is recognised at rated speed.

288-pin unbuffered form factor

Modules use the standard 288-pin UDIMM layout required by the X13SAQ, not ECC or SODIMM variants. Major OEM chips from Samsung, Micron or Hynix are tested for stability at the specified speed and latency. No heat spreader is fitted, keeping the profile low for tight DIMM spacing.

Replaces smaller or slower DDR5 kits

The jump is worth it when your workload needs more than 32GB total capacity or when the current memory runs below 5600 MT/s. Buyers who need ECC error correction, registered modules or a different pin count should look elsewhere.

Privalumai

  • 64 GB kit lets your Supermicro X13SAQ run at full DDR5-5600 speed
  • CL46 timing and 1.10 V match the board's memory controller for stable operation
  • 2Rx8 dual-rank organisation maximises bandwidth across the two 32 GB modules
  • 288-pin UDIMM form factor fits the X13SAQ slots without adapters or ECC modules
  • Major OEM Samsung, Micron or Hynix chips tested at rated specifications for reliability

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

What speed does the DDR5 5600 PC5-44800 interface actually run at on the Supermicro X13SAQ?

The kit is rated for DDR5 5600 (PC5-44800) and will operate at that speed when the motherboard memory controller accepts the 2Rx8 1.1 V CL46 modules without down-clocking.

What physical slot and clearance does the 288-pin UDIMM kit need on the X13SAQ?

Each 32 GB module uses the standard 288-pin DDR5 UDIMM form factor with no heat spreader, so it fits any unbuffered DIMM slot on the board provided adjacent components do not block the module height.

Which DIMM slots should I populate first on the Supermicro X13SAQ for this 2x32 GB kit?

Install the two modules in the primary channel pair indicated in the motherboard manual — typically slots 1 and 3 or 2 and 4 — so the board recognises the full 64 GB at the rated 5600 MT/s timing.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.