Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Two green circuit boards with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 5600 CL46 2Rx8 1.1V UDIMM Supermicro X13SAQ memory upgrade

SKU CH-0T2Y-60PZ3

A 64 GB DDR5 kit of two 32 GB UDIMMs running at 5600 MT/s with CL46 latency, 1.1 V operation and 2Rx8 rank, verified for the Supermicro X13SAQ motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 64GB 2X32GB

  • 64 GB kit lets your Supermicro X13SAQ run at full DDR5-5600 speed
  • CL46 timing and 1.10 V match the board's memory controller for stable operation
  • 2Rx8 dual-rank organisation maximises bandwidth across the two 32 GB modules
  • 288-pin UDIMM form factor fits the X13SAQ slots without adapters or ECC modules
  • Major OEM Samsung, Micron or Hynix chips tested at rated specifications for reliability

Exact-match upgrade for Supermicro X13SAQ

This 64GB kit delivers two 32GB DDR5 5600 CL46 2Rx8 UDIMMs at 1.1V. It is built for the Supermicro X13SAQ motherboard and matches the board's memory-controller requirements for rank, voltage and timing so the full capacity is recognised at rated speed.

288-pin unbuffered form factor

Modules use the standard 288-pin UDIMM layout required by the X13SAQ, not ECC or SODIMM variants. Major OEM chips from Samsung, Micron or Hynix are tested for stability at the specified speed and latency. No heat spreader is fitted, keeping the profile low for tight DIMM spacing.

Replaces smaller or slower DDR5 kits

The jump is worth it when your workload needs more than 32GB total capacity or when the current memory runs below 5600 MT/s. Buyers who need ECC error correction, registered modules or a different pin count should look elsewhere.

Ciri-ciri utama

  • 64 GB kit lets your Supermicro X13SAQ run at full DDR5-5600 speed
  • CL46 timing and 1.10 V match the board's memory controller for stable operation
  • 2Rx8 dual-rank organisation maximises bandwidth across the two 32 GB modules
  • 288-pin UDIMM form factor fits the X13SAQ slots without adapters or ECC modules
  • Major OEM Samsung, Micron or Hynix chips tested at rated specifications for reliability

Spesifikasi

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

What speed does the DDR5 5600 PC5-44800 interface actually run at on the Supermicro X13SAQ?

The kit is rated for DDR5 5600 (PC5-44800) and will operate at that speed when the motherboard memory controller accepts the 2Rx8 1.1 V CL46 modules without down-clocking.

What physical slot and clearance does the 288-pin UDIMM kit need on the X13SAQ?

Each 32 GB module uses the standard 288-pin DDR5 UDIMM form factor with no heat spreader, so it fits any unbuffered DIMM slot on the board provided adjacent components do not block the module height.

Which DIMM slots should I populate first on the Supermicro X13SAQ for this 2x32 GB kit?

Install the two modules in the primary channel pair indicated in the motherboard manual — typically slots 1 and 3 or 2 and 4 — so the board recognises the full 64 GB at the rated 5600 MT/s timing.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.