Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Four green DDR5 RDIMM modules without heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 64GB (4 x 16GB) DDR5 5600 CL46 1Rx8 ECC Registered RDIMM Supermicro H13SVW-N memory upgrade

SKU CH-9EXP-NGZ3C

A 64 GB kit of four 16 GB DDR5-5600 registered ECC RDIMMs built for the Supermicro H13SVW-N motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 4X16GB

Rodyti 12 daugiau konfigūracijų

Speed 5600MHz

  • 64 GB total capacity from four 16 GB modules for high-density server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the H13SVW-N platform
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the board's memory-controller specification exactly
  • 288-pin RDIMM form factor ensures correct physical and electrical fit in Supermicro H13SVW-N motherboard

64GB DDR5-5600 ECC RDIMM kit for Supermicro H13SVW-N

This 64GB kit contains four 16GB DDR5 5600 Registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro H13SVW-N memory controller expects. It is intended for administrators upgrading that specific motherboard with validated modules. Builders using other boards or needing unbuffered UDIMMs should select a different product.

Registered architecture and 288-pin DDR5 form factor

Each module uses a 288-pin Registered RDIMM design that buffers address and command signals, allowing all slots to run fully populated at the rated 5600 MT/s speed. ECC circuitry corrects single-bit errors on the fly, protecting data integrity in production workloads. The modules operate at 1.1V and carry no heat spreader, so airflow in the chassis must be sufficient for bare DRAM.

Four-module kit matched to population rules

The package delivers four matched 16GB sticks in a single kit, simplifying installation according to the motherboard's approved DIMM population order. No additional software or accessories are included; the value is the verified compatibility and lifetime replacement backing with US-based technical support. Verify your system manual for supported capacities before ordering.

Privalumai

  • 64 GB total capacity from four 16 GB modules for high-density server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the H13SVW-N platform
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the board's memory-controller specification exactly
  • 288-pin RDIMM form factor ensures correct physical and electrical fit in Supermicro H13SVW-N motherboard

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Does this DDR5-5600 RDIMM kit run at the rated 5600 MT/s on the Supermicro H13SVW-N?

Yes, the kit is specified at DDR5 5600 (PC5 44800) with CL46 and 1.10 V, matching the memory controller expectations for this motherboard.

What physical slot and form factor do these modules need?

Each module is a 288-pin DDR5 RDIMM; the H13SVW-N requires registered DIMMs, not UDIMM or SODIMM, and the kit provides four 16 GB sticks.

In what order should the four RDIMMs be populated?

Consult the Supermicro H13SVW-N manual for the approved DIMM population sequence; the board's population rules determine which slots to fill first for full 64 GB operation.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.