Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR5 RDIMM modules without heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 64GB (4 x 16GB) DDR5 5600 CL46 1Rx8 ECC Registered RDIMM Supermicro H13SVW-N memory upgrade

SKU CH-9EXP-NGZ3C

A 64 GB kit of four 16 GB DDR5-5600 registered ECC RDIMMs built for the Supermicro H13SVW-N motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 4X16GB

Näytä 12 muuta kokoonpanoa

Speed 5600MHz

  • 64 GB total capacity from four 16 GB modules for high-density server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the H13SVW-N platform
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the board's memory-controller specification exactly
  • 288-pin RDIMM form factor ensures correct physical and electrical fit in Supermicro H13SVW-N motherboard

64GB DDR5-5600 ECC RDIMM kit for Supermicro H13SVW-N

This 64GB kit contains four 16GB DDR5 5600 Registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro H13SVW-N memory controller expects. It is intended for administrators upgrading that specific motherboard with validated modules. Builders using other boards or needing unbuffered UDIMMs should select a different product.

Registered architecture and 288-pin DDR5 form factor

Each module uses a 288-pin Registered RDIMM design that buffers address and command signals, allowing all slots to run fully populated at the rated 5600 MT/s speed. ECC circuitry corrects single-bit errors on the fly, protecting data integrity in production workloads. The modules operate at 1.1V and carry no heat spreader, so airflow in the chassis must be sufficient for bare DRAM.

Four-module kit matched to population rules

The package delivers four matched 16GB sticks in a single kit, simplifying installation according to the motherboard's approved DIMM population order. No additional software or accessories are included; the value is the verified compatibility and lifetime replacement backing with US-based technical support. Verify your system manual for supported capacities before ordering.

Kohokohdat

  • 64 GB total capacity from four 16 GB modules for high-density server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the H13SVW-N platform
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the board's memory-controller specification exactly
  • 288-pin RDIMM form factor ensures correct physical and electrical fit in Supermicro H13SVW-N motherboard

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does this DDR5-5600 RDIMM kit run at the rated 5600 MT/s on the Supermicro H13SVW-N?

Yes, the kit is specified at DDR5 5600 (PC5 44800) with CL46 and 1.10 V, matching the memory controller expectations for this motherboard.

What physical slot and form factor do these modules need?

Each module is a 288-pin DDR5 RDIMM; the H13SVW-N requires registered DIMMs, not UDIMM or SODIMM, and the kit provides four 16 GB sticks.

In what order should the four RDIMMs be populated?

Consult the Supermicro H13SVW-N manual for the approved DIMM population sequence; the board's population rules determine which slots to fill first for full 64 GB operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.