Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR5 RDIMM modules, bare circuit boards with gold contacts and black chips

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 192GB (2x96GB) CL46 1.1V 2Rx4 Supermicro H13SVW-N memory upgrade

SKU CH-99S5-8JYPQ

192 GB DDR5 5600 ECC registered RDIMM kit (2 × 96 GB, CL46, 1.1 V, 2Rx4) validated for Supermicro H13SVW-N

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Näytä 12 muuta kokoonpanoa

Speed 5600MHz

  • 192 GB total capacity from two 96 GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC design corrects errors and supports full population
  • 1 V operation matches the server memory controller specification
  • Verified compatible with Supermicro H13SVW-N motherboard

192 GB DDR5-5600 ECC RDIMM kit

This 192 GB kit contains two 96 GB DDR5-5600 registered ECC modules built to the PC5-44800 standard. It is intended for administrators upgrading a Supermicro H13SVW-N motherboard that requires 288-pin RDIMMs with registered buffering and error-correcting code.

Registered DDR5 limits and population rules

Registered DDR5 offloads the memory controller so every slot can run fully populated at the rated 5600 MT/s speed, but the motherboard manual defines the maximum capacity per channel and the required DIMM population order. ECC corrects single-bit errors on the fly, yet it cannot protect against multi-bit failures or replace a proper backup strategy. The 1.1 V operating voltage is fixed by the DDR5 specification for this module class.

Upgrade from smaller or unbuffered DDR5 kits

This kit replaces lower-capacity RDIMM sets or unbuffered UDIMMs that the H13SVW-N cannot recognise at full population. The jump is worth it when the workload demands the full 192 GB at native DDR5-5600 throughput with registered stability and ECC integrity. Systems limited to fewer slots, lower speeds or UDIMM-only designs will not benefit.

Kohokohdat

  • 192 GB total capacity from two 96 GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC design corrects errors and supports full population
  • 1 V operation matches the server memory controller specification
  • Verified compatible with Supermicro H13SVW-N motherboard

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I choose the 192 GB kit or a different capacity for my Supermicro H13SVW-N?

This 192 GB kit provides two 96 GB modules that match the board's DDR5-5600 Registered ECC requirements; verify your motherboard manual for maximum supported capacity and approved population order before ordering.

What does DDR5-5600 CL46 mean for real-world server performance?

The modules run at 5600 MT/s with a CAS latency of 46 cycles, delivering the rated bandwidth and timing the memory controller expects for stable operation in the Supermicro H13SVW-N.

Is the 288-pin RDIMM interface compatible with standard DDR5 UDIMM slots?

No, the 288-pin Registered DIMM form factor is keyed differently and requires RDIMM slots; it will not fit or function in UDIMM or SODIMM sockets.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.