Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Four green DDR5 UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 5600 CL46 UDIMM Kit for Supermicro X13SAW-TLN4F

SKU CH-6036-SCJC0

A 64GB kit of four 16GB DDR5 5600 CL46 UDIMM modules built for the Supermicro X13SAW-TLN4F motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 64GB 4X16GB

  • 64 GB total capacity across four 16 GB modules for high-density desktop workloads
  • DDR5 5600 speed (PC5-44800) delivers rated bandwidth for the Supermicro X13SAW-TLN4F
  • CL46 CAS latency and 1.10 V operation match the board's memory controller expectations
  • 288-pin unbuffered non-ECC UDIMM form factor fits the motherboard's DIMM slots exactly
  • Built with major OEM chips from Samsung, Micron or Hynix and tested for stability

Precise DDR5-5600 kit for Supermicro X13SAW-TLN4F

This 64GB kit delivers four 16GB UDIMMs rated at DDR5 5600 with CL46 latency. It matches the exact rank, voltage, and timing the Supermicro X13SAW-TLN4F memory controller expects for full-capacity recognition at rated speed. Builders upgrading that specific motherboard receive a verified fit without guesswork.

Thermals and power at 1.10V

Operating at 1.10V, the unbuffered modules draw minimal power and generate low heat under normal workloads. No heat spreaders are fitted, so airflow across the 288-pin DIMMs is sufficient for stable operation. The major OEM chips from Samsung, Micron, or Hynix are tested for stability at the rated speed and timing.

1Rx8 Non-ECC UDIMM constraint

The kit uses 1Rx8 Non-ECC unbuffered DDR5, which is the only module type this motherboard accepts in its memory slots. ECC registered DIMMs or SODIMMs will not work. Buyers needing ECC error correction or a different form factor must select a different product.

Privalumai

  • 64 GB total capacity across four 16 GB modules for high-density desktop workloads
  • DDR5 5600 speed (PC5-44800) delivers rated bandwidth for the Supermicro X13SAW-TLN4F
  • CL46 CAS latency and 1.10 V operation match the board's memory controller expectations
  • 288-pin unbuffered non-ECC UDIMM form factor fits the motherboard's DIMM slots exactly
  • Built with major OEM chips from Samsung, Micron or Hynix and tested for stability

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How do I install the 4x16GB DDR5 5600 UDIMM kit in the Supermicro X13SAW-TLN4F, and what step is often missed?

Power off the system, open the chassis, and insert each 288-pin module into the slots specified by the motherboard manual in the correct population order; the step most often missed is consulting that manual for the approved DIMM sequence before installation.

What maintenance or replacement will the 64GB DDR5 kit need over time?

The modules have no heat spreaders and no moving parts, so no periodic maintenance is required; replacement is only necessary if a module fails, which is covered by the lifetime replacement warranty.

What limit appears first when the 1Rx8 CL46 1.1V DDR5 kit runs under sustained load?

The primary limit is the fixed CAS latency of CL46 at the rated 5600 MT/s speed; without overclocking headroom or XMP profiles, the modules cannot exceed this timing under continuous operation.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.