Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Four green DDR5 UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 5600 CL46 UDIMM Kit for Supermicro X13SAW-TLN4F

SKU CH-6036-SCJC0

A 64GB kit of four 16GB DDR5 5600 CL46 UDIMM modules built for the Supermicro X13SAW-TLN4F motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 64GB 4X16GB

  • 64 GB total capacity across four 16 GB modules for high-density desktop workloads
  • DDR5 5600 speed (PC5-44800) delivers rated bandwidth for the Supermicro X13SAW-TLN4F
  • CL46 CAS latency and 1.10 V operation match the board's memory controller expectations
  • 288-pin unbuffered non-ECC UDIMM form factor fits the motherboard's DIMM slots exactly
  • Built with major OEM chips from Samsung, Micron or Hynix and tested for stability

Precise DDR5-5600 kit for Supermicro X13SAW-TLN4F

This 64GB kit delivers four 16GB UDIMMs rated at DDR5 5600 with CL46 latency. It matches the exact rank, voltage, and timing the Supermicro X13SAW-TLN4F memory controller expects for full-capacity recognition at rated speed. Builders upgrading that specific motherboard receive a verified fit without guesswork.

Thermals and power at 1.10V

Operating at 1.10V, the unbuffered modules draw minimal power and generate low heat under normal workloads. No heat spreaders are fitted, so airflow across the 288-pin DIMMs is sufficient for stable operation. The major OEM chips from Samsung, Micron, or Hynix are tested for stability at the rated speed and timing.

1Rx8 Non-ECC UDIMM constraint

The kit uses 1Rx8 Non-ECC unbuffered DDR5, which is the only module type this motherboard accepts in its memory slots. ECC registered DIMMs or SODIMMs will not work. Buyers needing ECC error correction or a different form factor must select a different product.

Puntos fuertes

  • 64 GB total capacity across four 16 GB modules for high-density desktop workloads
  • DDR5 5600 speed (PC5-44800) delivers rated bandwidth for the Supermicro X13SAW-TLN4F
  • CL46 CAS latency and 1.10 V operation match the board's memory controller expectations
  • 288-pin unbuffered non-ECC UDIMM form factor fits the motherboard's DIMM slots exactly
  • Built with major OEM chips from Samsung, Micron or Hynix and tested for stability

Especificaciones

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

How do I install the 4x16GB DDR5 5600 UDIMM kit in the Supermicro X13SAW-TLN4F, and what step is often missed?

Power off the system, open the chassis, and insert each 288-pin module into the slots specified by the motherboard manual in the correct population order; the step most often missed is consulting that manual for the approved DIMM sequence before installation.

What maintenance or replacement will the 64GB DDR5 kit need over time?

The modules have no heat spreaders and no moving parts, so no periodic maintenance is required; replacement is only necessary if a module fails, which is covered by the lifetime replacement warranty.

What limit appears first when the 1Rx8 CL46 1.1V DDR5 kit runs under sustained load?

The primary limit is the fixed CAS latency of CL46 at the rated 5600 MT/s speed; without overclocking headroom or XMP profiles, the modules cannot exceed this timing under continuous operation.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.