Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 768GB DDR5 4800 ECC RDIMM 6x128GB Supermicro H13DSG-O-CPU-D memory upgrade

SKU CH-YEEJ-CEYDM

768 GB DDR5-4800 ECC registered server memory kit in six 128 GB modules, CL40 at 1.1 V, 288-pin RDIMM form factor, validated for the Supermicro H13DSG-O-CPU-D motherboard

  • Capacity768GB (6 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 768GB 6X128GB

Rodyti 30 daugiau konfigūracijų
  • 768 GB total capacity from six 128 GB modules for large-scale workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput
  • Registered ECC architecture corrects single-bit errors and stabilises full population
  • 1 V operation matches the platform's voltage requirement exactly
  • 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU-D motherboard

Exact-match server upgrade

This 768GB kit contains six 128GB DDR5 4800 RDIMM modules built to the Supermicro H13DSG-O-CPU-D motherboard's specifications. Each module runs at 1.1V with CL40 timing and 2Rx4 registered ECC architecture. The kit delivers the precise rank, voltage and timing the memory controller expects for full-capacity recognition at rated speed.

Enterprise workloads not consumer builds

Suited for administrators populating every slot on a supported Supermicro server where registered ECC stability and maximum capacity are required. Not suited for workstations or desktops that accept only unbuffered UDIMMs, nor for systems limited to lower densities or slower DDR5 speeds. Buyers needing SODIMM form factors or non-ECC memory should look elsewhere.

Six-slot population at full speed

The 288-pin registered design offloads the memory controller so all six slots operate at DDR5 4800 without signal degradation. ECC corrects single-bit errors on the fly to prevent silent data corruption in production. Verify your motherboard manual for approved population order and maximum supported capacity before installation. No heat spreaders are included.

Privalumai

  • 768 GB total capacity from six 128 GB modules for large-scale workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput
  • Registered ECC architecture corrects single-bit errors and stabilises full population
  • 1 V operation matches the platform's voltage requirement exactly
  • 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU-D motherboard

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K6
Capacity768GB (6 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 6X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Does the Supermicro H13DSG-O-CPU-D motherboard need to be present for this 768GB kit to function?

Yes, this 6 x 128GB DDR5 4800 RDIMM kit is built specifically for the Supermicro H13DSG-O-CPU-D motherboard and requires that board's 288-pin registered DIMM slots to operate.

Can I mix these 2Rx4 DDR5 4800 CL40 modules with any existing RDIMMs already installed in the system?

Mixing ranks, speeds or latencies is not recommended; the motherboard's memory controller expects identical 2Rx4 DDR5 4800 CL40 1.1V modules in every populated slot for stable operation.

How can I verify the full 768GB is recognised and running at DDR5 4800 after installation?

Check the BIOS memory information screen or the operating system's memory report — both should show 768GB total capacity and a running speed of 4800 MT/s with CL40 timings.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.