Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 768GB DDR5 4800 ECC RDIMM 6x128GB Supermicro H13DSG-O-CPU-D memory upgrade

SKU CH-YEEJ-CEYDM

768 GB DDR5-4800 ECC registered server memory kit in six 128 GB modules, CL40 at 1.1 V, 288-pin RDIMM form factor, validated for the Supermicro H13DSG-O-CPU-D motherboard

  • Capacity768GB (6 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 768GB 6X128GB

Vedeți celelalte 30 configurații
  • 768 GB total capacity from six 128 GB modules for large-scale workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput
  • Registered ECC architecture corrects single-bit errors and stabilises full population
  • 1 V operation matches the platform's voltage requirement exactly
  • 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU-D motherboard

Exact-match server upgrade

This 768GB kit contains six 128GB DDR5 4800 RDIMM modules built to the Supermicro H13DSG-O-CPU-D motherboard's specifications. Each module runs at 1.1V with CL40 timing and 2Rx4 registered ECC architecture. The kit delivers the precise rank, voltage and timing the memory controller expects for full-capacity recognition at rated speed.

Enterprise workloads not consumer builds

Suited for administrators populating every slot on a supported Supermicro server where registered ECC stability and maximum capacity are required. Not suited for workstations or desktops that accept only unbuffered UDIMMs, nor for systems limited to lower densities or slower DDR5 speeds. Buyers needing SODIMM form factors or non-ECC memory should look elsewhere.

Six-slot population at full speed

The 288-pin registered design offloads the memory controller so all six slots operate at DDR5 4800 without signal degradation. ECC corrects single-bit errors on the fly to prevent silent data corruption in production. Verify your motherboard manual for approved population order and maximum supported capacity before installation. No heat spreaders are included.

Puncte forte

  • 768 GB total capacity from six 128 GB modules for large-scale workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput
  • Registered ECC architecture corrects single-bit errors and stabilises full population
  • 1 V operation matches the platform's voltage requirement exactly
  • 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU-D motherboard

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K6
Capacity768GB (6 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 6X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Does the Supermicro H13DSG-O-CPU-D motherboard need to be present for this 768GB kit to function?

Yes, this 6 x 128GB DDR5 4800 RDIMM kit is built specifically for the Supermicro H13DSG-O-CPU-D motherboard and requires that board's 288-pin registered DIMM slots to operate.

Can I mix these 2Rx4 DDR5 4800 CL40 modules with any existing RDIMMs already installed in the system?

Mixing ranks, speeds or latencies is not recommended; the motherboard's memory controller expects identical 2Rx4 DDR5 4800 CL40 1.1V modules in every populated slot for stable operation.

How can I verify the full 768GB is recognised and running at DDR5 4800 after installation?

Check the BIOS memory information screen or the operating system's memory report — both should show 768GB total capacity and a running speed of 4800 MT/s with CL40 timings.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.