Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green circuit board SODIMM memory module with black chips, 204 pins, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR3 1333MHz POSIFLEX XT-3815 memory upgrade

SKU CH-09CB-PHYMD

8GB DDR3 1333MHz SODIMM upgrade for POSIFLEX XT-3815 terminals, CL9 1.50V unbuffered non-ECC module tested for point-of-sale reliability

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX XT-3815 terminal
  • 8GB DDR3 1333MHz boosts multitasking
  • Low-voltage 1.35V operation runs cool
  • 204-pin SODIMM fits kiosk boards
  • Tested with Samsung, Micron, Hynix chips

POSIFLEX XT-3815 8GB DDR3 SODIMM

This module is a 204-pin DDR3 SODIMM rated at 1333 MT/s with CL9 latency. It delivers 8GB of non-ECC unbuffered memory built for the POSIFLEX XT-3815 JIVA foldable terminal. The stick uses major-brand DRAM and runs at 1.35 V low voltage. It installs in a single slot to add capacity quickly.

Who this suits and who it does not

It suits technicians upgrading the POSIFLEX XT-3815 terminal to its maximum supported memory. It is not for builders who need ECC error correction or registered buffering for server boards. It is not for systems that require a different pin count, voltage, or DDR generation.

The specification that decides fit

The module must match the terminal's 204-pin DDR3 SODIMM slot, 1333 MT/s speed, 1.35 V operation, and non-ECC unbuffered design. If the service manual specifies any other voltage, pin layout, or memory type, this part will not work.

Privalumai

  • Designed for POSIFLEX XT-3815 terminal
  • 8GB DDR3 1333MHz boosts multitasking
  • Low-voltage 1.35V operation runs cool
  • 204-pin SODIMM fits kiosk boards
  • Tested with Samsung, Micron, Hynix chips

Specifikacijos

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Klausimai apie šią prekę

Does the 1.35 V DDR3 SODIMM run cooler than standard 1.5 V modules in a POSIFLEX XT-3815?

The module is rated at 1.35 V, which draws less power and generates less heat than 1.5 V DDR3, helping the terminal stay cooler during all-day operation.

What must the POSIFLEX XT-3815 already have for this 204-pin SODIMM to work?

The terminal needs a free DDR3 SODIMM slot that accepts 2Rx8 unbuffered non-ECC modules at 1333 MHz (PC3-10600).

Will this 8 GB DDR3 1333 MHz stick work alongside the original 4 GB module in my XT-3815?

Yes, it will run in dual-channel mode at 1333 MHz CL9 provided the existing module is also DDR3 1333 MHz non-ECC unbuffered.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.