We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board SODIMM memory module with black chips, 204 pins, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR3 1333MHz POSIFLEX XT-3815 memory upgrade

SKU CH-09CB-PHYMD

8GB DDR3 1333MHz SODIMM upgrade for POSIFLEX XT-3815 terminals, CL9 1.50V unbuffered non-ECC module tested for point-of-sale reliability

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX XT-3815 terminal
  • 8GB DDR3 1333MHz boosts multitasking
  • Low-voltage 1.35V operation runs cool
  • 204-pin SODIMM fits kiosk boards
  • Tested with Samsung, Micron, Hynix chips

POSIFLEX XT-3815 8GB DDR3 SODIMM

This module is a 204-pin DDR3 SODIMM rated at 1333 MT/s with CL9 latency. It delivers 8GB of non-ECC unbuffered memory built for the POSIFLEX XT-3815 JIVA foldable terminal. The stick uses major-brand DRAM and runs at 1.35 V low voltage. It installs in a single slot to add capacity quickly.

Who this suits and who it does not

It suits technicians upgrading the POSIFLEX XT-3815 terminal to its maximum supported memory. It is not for builders who need ECC error correction or registered buffering for server boards. It is not for systems that require a different pin count, voltage, or DDR generation.

The specification that decides fit

The module must match the terminal's 204-pin DDR3 SODIMM slot, 1333 MT/s speed, 1.35 V operation, and non-ECC unbuffered design. If the service manual specifies any other voltage, pin layout, or memory type, this part will not work.

Highlights

  • Designed for POSIFLEX XT-3815 terminal
  • 8GB DDR3 1333MHz boosts multitasking
  • Low-voltage 1.35V operation runs cool
  • 204-pin SODIMM fits kiosk boards
  • Tested with Samsung, Micron, Hynix chips

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Does the 1.35 V DDR3 SODIMM run cooler than standard 1.5 V modules in a POSIFLEX XT-3815?

The module is rated at 1.35 V, which draws less power and generates less heat than 1.5 V DDR3, helping the terminal stay cooler during all-day operation.

What must the POSIFLEX XT-3815 already have for this 204-pin SODIMM to work?

The terminal needs a free DDR3 SODIMM slot that accepts 2Rx8 unbuffered non-ECC modules at 1333 MHz (PC3-10600).

Will this 8 GB DDR3 1333 MHz stick work alongside the original 4 GB module in my XT-3815?

Yes, it will run in dual-channel mode at 1333 MHz CL9 provided the existing module is also DDR3 1333 MHz non-ECC unbuffered.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.