NEMIX RAM
NEMIX RAM 8GB DDR4 3200 SODIMM POSIFLEX JK-3250 memory upgrade
8 GB DDR4 3200 SODIMM module built for the POSIFLEX JK-3250 Cachet Series kiosk, CL22 latency at 1.2 V
- Capacity8GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8 GB capacity expands kiosk multitasking headroom
- DDR4 3200 speed matches POSIFLEX JK-3250 spec
- CL22 latency keeps data flowing smoothly
- 2 V operation reduces thermal load
- 260-pin SODIMM drops straight into the slot
POSIFLEX JK-3250 Cachet Series kiosk memory
This 8 GB DDR4 3200 SODIMM is built specifically for the POSIFLEX JK-3250 Cachet Series kiosk. It delivers a direct, plug-in capacity increase for point-of-sale terminals that need more headroom for daily transaction workloads. The module arrives new and ready for immediate installation.
Suits technicians upgrading a single JK-3250 unit
The stick is a 260-pin, 1.2 V, CL22, 2Rx8 unbuffered SODIMM validated for that exact kiosk platform. It is not for desktop PCs, standard laptops, or any system requiring ECC, registered modules, a different pin count, or a voltage other than 1.20 V.
260-pin DDR4 SODIMM form factor decides fit
Only platforms accepting a 260-pin DDR4 SODIMM at 3200 MT/s with CL22 timing and 1.20 V operation can use this module. Verify the service manual specifies PC4-25600 unbuffered non-ECC memory before purchasing.
Privalumai
- 8 GB capacity expands kiosk multitasking headroom
- DDR4 3200 speed matches POSIFLEX JK-3250 spec
- CL22 latency keeps data flowing smoothly
- 2 V operation reduces thermal load
- 260-pin SODIMM drops straight into the slot
Specifikacijos
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K1 |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Klausimai apie šią prekę
How much heat does the 1.2 V DDR4 module add when the kiosk runs continuously?
At 1.2 V the SODIMM draws minimal power, so it adds very little heat during all-day operation.
What must the POSIFLEX JK-3250 already have for this 260-pin SODIMM to fit?
The kiosk needs an empty 260-pin DDR4 SODIMM slot that accepts 2Rx8 modules.
Will the CL22 timing work with the original memory already installed in the JK-3250?
Yes, the module runs at the standard DDR4 3200 speed with CL22 latency, matching the system's memory controller.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.



