NEMIX RAM
NEMIX RAM 8GB DDR4 3200 SODIMM POSIFLEX JK-3250 memory upgrade
8 GB DDR4 3200 SODIMM module built for the POSIFLEX JK-3250 Cachet Series kiosk, CL22 latency at 1.2 V
- Capacity8GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8 GB capacity expands kiosk multitasking headroom
- DDR4 3200 speed matches POSIFLEX JK-3250 spec
- CL22 latency keeps data flowing smoothly
- 2 V operation reduces thermal load
- 260-pin SODIMM drops straight into the slot
POSIFLEX JK-3250 Cachet Series kiosk memory
This 8 GB DDR4 3200 SODIMM is built specifically for the POSIFLEX JK-3250 Cachet Series kiosk. It delivers a direct, plug-in capacity increase for point-of-sale terminals that need more headroom for daily transaction workloads. The module arrives new and ready for immediate installation.
Suits technicians upgrading a single JK-3250 unit
The stick is a 260-pin, 1.2 V, CL22, 2Rx8 unbuffered SODIMM validated for that exact kiosk platform. It is not for desktop PCs, standard laptops, or any system requiring ECC, registered modules, a different pin count, or a voltage other than 1.20 V.
260-pin DDR4 SODIMM form factor decides fit
Only platforms accepting a 260-pin DDR4 SODIMM at 3200 MT/s with CL22 timing and 1.20 V operation can use this module. Verify the service manual specifies PC4-25600 unbuffered non-ECC memory before purchasing.
أبرز المميزات
- 8 GB capacity expands kiosk multitasking headroom
- DDR4 3200 speed matches POSIFLEX JK-3250 spec
- CL22 latency keeps data flowing smoothly
- 2 V operation reduces thermal load
- 260-pin SODIMM drops straight into the slot
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K1 |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
أسئلة حول هذا المنتج
How much heat does the 1.2 V DDR4 module add when the kiosk runs continuously?
At 1.2 V the SODIMM draws minimal power, so it adds very little heat during all-day operation.
What must the POSIFLEX JK-3250 already have for this 260-pin SODIMM to fit?
The kiosk needs an empty 260-pin DDR4 SODIMM slot that accepts 2Rx8 modules.
Will the CL22 timing work with the original memory already installed in the JK-3250?
Yes, the module runs at the standard DDR4 3200 speed with CL22 latency, matching the system's memory controller.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.



