Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Twelve green DDR4 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 96GB (12x8GB) DDR4 2933 ECC RDIMM CL21 Dell Precision 7920 memory upgrade

SKU CH-285A-MWB5S

A 96 GB DDR4 ECC registered memory kit with twelve 8 GB modules running at 2933 MHz CL21 for Dell Precision 7920 workstations

  • Capacity96GB (12 x 8GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 96 GB capacity across twelve 8 GB modules expands workstation memory
  • DDR4 2933 speed with CL21 latency supports high-throughput workloads
  • ECC registered RDIMM design detects and corrects single-bit errors
  • 2 V operation reduces power draw in Dell Precision 7920 systems
  • 288-pin 1Rx8 configuration ensures direct compatibility with the target platform

Dell Precision 7920 memory kit

This 96GB kit is built for the Dell Precision 7920 rack or tower workstation. It contains twelve 8GB DDR4 2933 ECC registered DIMMs that install directly into the system's memory slots. The modules are designed for professionals who need reliable, error-correcting memory in a supported configuration. No heat spreaders are included on the sticks.

96GB capacity and DDR4 2933 speed

The kit delivers 96GB total capacity across twelve single-rank 1Rx8 modules running at 2933MT/s (PC4-23400) with CL21 latency at 1.20V. This headroom handles large datasets, virtual machines and multi-application workloads typical of workstation use. Capacity is fixed at 96GB; the kit does not support mixing with other speeds or non-ECC memory. Systems requiring more than 96GB or different speeds will need a separate upgrade path.

Registered ECC modules with OEM chips

Each DIMM uses major OEM Samsung, Micron or Hynix components and presents a 288-pin registered interface to the motherboard. The registered design reduces electrical load on the memory controller, allowing the full twelve-module population. ECC corrects single-bit errors to protect data integrity during long compute jobs. The kit includes only the twelve memory modules; no additional cables, brackets or software are supplied.

Privalumai

  • 96 GB capacity across twelve 8 GB modules expands workstation memory
  • DDR4 2933 speed with CL21 latency supports high-throughput workloads
  • ECC registered RDIMM design detects and corrects single-bit errors
  • 2 V operation reduces power draw in Dell Precision 7920 systems
  • 288-pin 1Rx8 configuration ensures direct compatibility with the target platform

Specifikacijos

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 2933MHZ RDIMM Registered Server Memory
Part NumberMR23400-818K12
Capacity96GB (12 x 8GB)
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content96GB (12X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory KIT

Klausimai apie šią prekę

Will the 12 modules at 2933 speed and CL21 work alongside any existing DDR4 RDIMMs already installed in my Precision 7920?

Yes, the kit uses standard DDR4 2933 registered ECC RDIMMs at 1.2 V with CL21 timing; matching speed, voltage, rank (1Rx8) and registered type lets them run together with other compliant modules in the 7920.

How can I verify the full 96 GB is recognised and running at 2933 MHz with ECC active after installation?

Enter the system BIOS or UEFI and confirm the memory summary shows 96 GB total, 2933 MT/s operating speed and ECC enabled; operating-system tools such as dmidecode or Windows Task Manager will report the same figures.

Does the package include only the twelve 8 GB RDIMMs or are any tools, heat spreaders or cables supplied?

The box contains the 12 × 8 GB DDR4 2933 CL21 1.2 V 288-pin ECC registered RDIMMs and nothing else; no heat spreaders, installation tools or cables are included.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.