Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green printed circuit board with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 CL46 2Rx4 ECC Registered RDIMM X14SDW-42C-SP9F memory upgrade

SKU CH-2BC3-C1XRR

96GB DDR5 5600 ECC registered RDIMM with CL46 latency and 1.1V operation, validated for Supermicro X14SDW-42C-SP9F motherboards

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB

  • 96GB capacity lets you populate high-density server slots with a single module
  • DDR5 5600 speed matches the motherboard's rated frequency for full-rated throughput
  • CL46 CAS latency delivers the exact timing the memory controller expects
  • 2Rx4 Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 1V operation at 288-pin RDIMM form factor fits the Supermicro X14SDW-42C-SP9F without adapters

Exact DDR5-5600 Registered ECC Upgrade

This 96GB DDR5 RDIMM runs at 5600MHz PC5-44800 with CL46 latency and 1.1V operation. The 2Rx4 registered ECC design matches the memory controller requirements of the Supermicro X14SDW-42C-SP9F motherboard for full-capacity recognition.

Suits Supermicro X14SDW-42C-SP9F builders needing

This module fits servers that require 288-pin registered DDR5 with ECC and 2Rx4 organisation. Builders using consumer UDIMMs, SODIMMs, non-ECC memory, or different rank configurations should look elsewhere.

Fits the X14SDW-42C-SP9F DIMM slots directly

The registered architecture reduces electrical load on the memory controller when all slots are populated. ECC corrects single-bit errors automatically. Verify your motherboard manual for approved population order and maximum supported capacity before installation.

Privalumai

  • 96GB capacity lets you populate high-density server slots with a single module
  • DDR5 5600 speed matches the motherboard's rated frequency for full-rated throughput
  • CL46 CAS latency delivers the exact timing the memory controller expects
  • 2Rx4 Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 1V operation at 288-pin RDIMM form factor fits the Supermicro X14SDW-42C-SP9F without adapters

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

What motherboard must I already own for this 96GB DDR5 5600 CL46 2Rx4 ECC RDIMM to be recognised at full capacity?

The module is validated for the Supermicro X14SDW-42C-SP9F motherboard running DDR5 5600 (PC5-44800) with 288-pin registered DIMM slots.

Can I keep my existing DDR5 4800 RDIMMs installed alongside this 96GB 5600 MHz kit in the same server?

The board will down-clock every populated slot to the slowest common speed, so the 5600 MHz modules would run at 4800 MHz with looser timings.

How do I confirm the 96GB kit is operating at DDR5 5600 CL46 with ECC active after installation?

Enter the BIOS or use a hardware-inventory tool such as dmidecode and verify the reported speed shows 5600 MT/s, CAS latency 46 and ECC status enabled.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.