We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 CL46 2Rx4 ECC Registered RDIMM X14SDW-42C-SP9F memory upgrade

SKU CH-2BC3-C1XRR

96GB DDR5 5600 ECC registered RDIMM with CL46 latency and 1.1V operation, validated for Supermicro X14SDW-42C-SP9F motherboards

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 96GB capacity lets you populate high-density server slots with a single module
  • DDR5 5600 speed matches the motherboard's rated frequency for full-rated throughput
  • CL46 CAS latency delivers the exact timing the memory controller expects
  • 2Rx4 Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 1V operation at 288-pin RDIMM form factor fits the Supermicro X14SDW-42C-SP9F without adapters

Exact DDR5-5600 Registered ECC Upgrade

This 96GB DDR5 RDIMM runs at 5600MHz PC5-44800 with CL46 latency and 1.1V operation. The 2Rx4 registered ECC design matches the memory controller requirements of the Supermicro X14SDW-42C-SP9F motherboard for full-capacity recognition.

Suits Supermicro X14SDW-42C-SP9F builders needing

This module fits servers that require 288-pin registered DDR5 with ECC and 2Rx4 organisation. Builders using consumer UDIMMs, SODIMMs, non-ECC memory, or different rank configurations should look elsewhere.

Fits the X14SDW-42C-SP9F DIMM slots directly

The registered architecture reduces electrical load on the memory controller when all slots are populated. ECC corrects single-bit errors automatically. Verify your motherboard manual for approved population order and maximum supported capacity before installation.

Highlights

  • 96GB capacity lets you populate high-density server slots with a single module
  • DDR5 5600 speed matches the motherboard's rated frequency for full-rated throughput
  • CL46 CAS latency delivers the exact timing the memory controller expects
  • 2Rx4 Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 1V operation at 288-pin RDIMM form factor fits the Supermicro X14SDW-42C-SP9F without adapters

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What motherboard must I already own for this 96GB DDR5 5600 CL46 2Rx4 ECC RDIMM to be recognised at full capacity?

The module is validated for the Supermicro X14SDW-42C-SP9F motherboard running DDR5 5600 (PC5-44800) with 288-pin registered DIMM slots.

Can I keep my existing DDR5 4800 RDIMMs installed alongside this 96GB 5600 MHz kit in the same server?

The board will down-clock every populated slot to the slowest common speed, so the 5600 MHz modules would run at 4800 MHz with looser timings.

How do I confirm the 96GB kit is operating at DDR5 5600 CL46 with ECC active after installation?

Enter the BIOS or use a hardware-inventory tool such as dmidecode and verify the reported speed shows 5600 MT/s, CAS latency 46 and ECC status enabled.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.