We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board memory module with gold edge connectors and black chips

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 ECC RDIMM CL46 2Rx4 1.1V 288-pin memory upgrade

SKU CH-W552-NHKKF

96GB DDR5 5600 ECC registered RDIMM with CL46 timing, 1.1V operation and 2Rx4 rank for Supermicro X14SDW-36CE-SP9F motherboards

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB

  • 96 GB capacity lets you fully populate server slots for maximum memory density
  • DDR5 5600 speed delivers PC5-44800 bandwidth for data-intensive workloads
  • Registered ECC design corrects single-bit errors and stabilises fully loaded channels
  • CL46 latency at 1.1 V balances response time with power efficiency
  • 288-pin RDIMM form factor matches Supermicro X14SDW-36CE-SP9F motherboard requirements

Exact-Match 96 GB DDR5-5600 RDIMM

This 96 GB DDR5-5600 (PC5-44800) registered ECC RDIMM is built for the Supermicro X14SDW-36CE-SP9F motherboard. It runs at 1.1 V with CL46 latency and a 2Rx4 organisation so the memory controller recognises the full capacity at rated speed. Enterprise workloads that demand data integrity and full-slot population are the target use case.

Verify Board Population Rules Before Ordering

Server and motherboard memory support varies by model so consult the system or motherboard manual for approved capacities, DIMM population order and installation steps. The module is a 288-pin registered RDIMM; it will not fit UDIMM or SODIMM slots and the board must support registered ECC DDR5 at this density. Buyers who need unbuffered memory or a different form factor cannot use this kit.

Registered ECC Build for Full-Slot Stability

Registered architecture offloads the memory controller allowing every slot to run fully populated at full capacity while ECC corrects single-bit errors on the fly preventing silent data corruption. Major OEM Samsung, Micron or Hynix chips are used without a heat spreader so airflow clearance is minimal. The 1.1 V operation matches the DDR5 baseline for server platforms.

Highlights

  • 96 GB capacity lets you fully populate server slots for maximum memory density
  • DDR5 5600 speed delivers PC5-44800 bandwidth for data-intensive workloads
  • Registered ECC design corrects single-bit errors and stabilises fully loaded channels
  • CL46 latency at 1.1 V balances response time with power efficiency
  • 288-pin RDIMM form factor matches Supermicro X14SDW-36CE-SP9F motherboard requirements

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 96GB DDR5 5600 RDIMM kit ship as a single 288-pin module or as multiple sticks?

The package contains one 96GB 288-pin DDR5 RDIMM; no extra cables, brackets or software are required, just an available registered DIMM slot on the motherboard.

Should I pick the 2Rx4 CL46 1.1V version or a different rank or voltage for the Supermicro X14SDW-36CE-SP9F?

Choose this exact 2Rx4 CL46 1.1V module; the board's memory controller expects that rank, voltage and timing, so a different rank or voltage would not be recognised at full speed.

What does the 5600MHz PC5-44800 rating deliver once the RDIMM is installed in the server?

The module runs at 5600MHz with CL46 latency and ECC error correction, giving the full 44800MB/s bandwidth the platform supports when all slots are populated.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.