NEMIX RAM
NEMIX RAM DDR5 5600 128GB 8x16GB CL46 1.1V ECC RDIMM Supermicro H13SSH
An 128GB kit of eight 16GB DDR5-5600 ECC registered RDIMMs at 1.1V CL46, validated for the Supermicro H13SSH motherboard
- Capacity128GB (8 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 128 GB total capacity from eight 16 GB modules
- DDR5 5600 speed with CL46 latency for rated performance
- 10 V operation reduces power draw per module
- ECC and registered design corrects errors and stabilises full population
- Verified fit for Supermicro H13SSH motherboard
128GB DDR5-5600 ECC RDIMM kit for Supermicro H13SSH
This 128GB kit contains eight 16GB DDR5 5600 Registered ECC RDIMMs built for the Supermicro H13SSH motherboard. Each module runs at 1.1V with CL46 latency and a 1Rx8 rank layout. The registered design and ECC support target servers that require full-slot population and error correction.
Tool-free DIMM seating.
Installation follows standard 288-pin RDIMM procedure: align the notch, press until the latches click, and confirm the modules sit evenly. The most common issue is ignoring the board's mandated population sequence, which can prevent the system from recognising all 128GB or force a lower speed.
Confirm H13SSH memory rules before ordering
Check the motherboard manual for approved capacity per slot, required DIMM installation order, and any BIOS version needed for full DDR5-5600 operation. This kit is DDR5 RDIMM only; it will not fit UDIMM or SODIMM slots. Ensure your chassis and CPU cooler clearances allow full-height modules.
Privalumai
- 128 GB total capacity from eight 16 GB modules
- DDR5 5600 speed with CL46 latency for rated performance
- 10 V operation reduces power draw per module
- ECC and registered design corrects errors and stabilises full population
- Verified fit for Supermicro H13SSH motherboard
Specifikacijos
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-618K8 |
| Capacity | 128GB (8 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB 8X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Klausimai apie šią prekę
How can I confirm the kit is running at DDR5 5600 with CL46 after installation?
Enter the server BIOS or UEFI and verify the memory speed shows 5600 MT/s and CAS latency reads CL46; the registered ECC modules will also report 1Rx8 organisation and 1.10 V operation.
What does the 128 GB kit contain and is anything else required?
The package includes eight 16 GB 288-pin DDR5 RDIMMs; no extra cables, brackets or heat spreaders are supplied or needed for the Supermicro H13SSH slots.
Which capacity or speed version should I choose for a fully populated H13SSH?
This 128 GB kit (8 × 16 GB) at DDR5 5600 CL46 1.10 V 1Rx8 registered ECC is the exact-match specification validated for full-population stability on the H13SSH motherboard.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.



