Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Eight green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 5600 128GB 8x16GB CL46 1.1V ECC RDIMM Supermicro H13SSH

SKU CH-5TSW-022D2

An 128GB kit of eight 16GB DDR5-5600 ECC registered RDIMMs at 1.1V CL46, validated for the Supermicro H13SSH motherboard

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 128 GB total capacity from eight 16 GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • 10 V operation reduces power draw per module
  • ECC and registered design corrects errors and stabilises full population
  • Verified fit for Supermicro H13SSH motherboard

128GB DDR5-5600 ECC RDIMM kit for Supermicro H13SSH

This 128GB kit contains eight 16GB DDR5 5600 Registered ECC RDIMMs built for the Supermicro H13SSH motherboard. Each module runs at 1.1V with CL46 latency and a 1Rx8 rank layout. The registered design and ECC support target servers that require full-slot population and error correction.

Tool-free DIMM seating.

Installation follows standard 288-pin RDIMM procedure: align the notch, press until the latches click, and confirm the modules sit evenly. The most common issue is ignoring the board's mandated population sequence, which can prevent the system from recognising all 128GB or force a lower speed.

Confirm H13SSH memory rules before ordering

Check the motherboard manual for approved capacity per slot, required DIMM installation order, and any BIOS version needed for full DDR5-5600 operation. This kit is DDR5 RDIMM only; it will not fit UDIMM or SODIMM slots. Ensure your chassis and CPU cooler clearances allow full-height modules.

Pluspunten

  • 128 GB total capacity from eight 16 GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • 10 V operation reduces power draw per module
  • ECC and registered design corrects errors and stabilises full population
  • Verified fit for Supermicro H13SSH motherboard

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K8
Capacity128GB (8 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 8X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Vragen over dit artikel

How can I confirm the kit is running at DDR5 5600 with CL46 after installation?

Enter the server BIOS or UEFI and verify the memory speed shows 5600 MT/s and CAS latency reads CL46; the registered ECC modules will also report 1Rx8 organisation and 1.10 V operation.

What does the 128 GB kit contain and is anything else required?

The package includes eight 16 GB 288-pin DDR5 RDIMMs; no extra cables, brackets or heat spreaders are supplied or needed for the Supermicro H13SSH slots.

Which capacity or speed version should I choose for a fully populated H13SSH?

This 128 GB kit (8 × 16 GB) at DDR5 5600 CL46 1.10 V 1Rx8 registered ECC is the exact-match specification validated for full-population stability on the H13SSH motherboard.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.