NEMIX RAM
NEMIX RAM DDR5 5600 256GB 4x64GB ECC RDIMM Supermicro H13DSG-O-CPU memory upgrade
A 256GB kit of four 64GB DDR5 5600 ECC registered RDIMMs validated for the Supermicro H13DSG-O-CPU motherboard
- Capacity256GB (4 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 256 GB total capacity across four 64 GB modules
- DDR5-5600 speed with CL46 latency for rated throughput
- Registered ECC architecture corrects single-bit errors on the fly
- 1 V operation matches server memory-controller specifications
- Verified 288-pin RDIMM fitment for Supermicro H13DSG-O-CPU motherboard
256GB DDR5 ECC RDIMM Kit for Supermicro H13DSG-O-CPU
This 256GB kit contains four 64GB DDR5 5600 registered ECC modules built to the exact voltage, rank and timing the Supermicro H13DSG-O-CPU motherboard expects. It installs as a matched set so the server recognises the full capacity at rated speed.
Who this suits and who should look elsewhere
Suits administrators upgrading a Supermicro H13DSG-O-CPU platform that requires 288-pin registered DDR5 with ECC. Not suitable for systems that accept only unbuffered UDIMMs, SODIMM form factors, or a different DDR generation.
Registered ECC architecture with 2Rx4 organisation
The 2Rx4 registered ECC design offloads the memory controller and corrects single-bit errors, allowing all four slots to run fully populated at 5600 MT/s without data corruption.
Privalumai
- 256 GB total capacity across four 64 GB modules
- DDR5-5600 speed with CL46 latency for rated throughput
- Registered ECC architecture corrects single-bit errors on the fly
- 1 V operation matches server memory-controller specifications
- Verified 288-pin RDIMM fitment for Supermicro H13DSG-O-CPU motherboard
Specifikacijos
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-924K4 |
| Capacity | 256GB (4 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 4X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Klausimai apie šią prekę
Will the 256GB kit run at DDR5 5600 with CL46 when all four slots of the Supermicro H13DSG-O-CPU are populated?
The kit is spec-matched to the motherboard's memory-population rules so the registered 2Rx4 modules operate at DDR5 5600 (PC5-44800) with CL46 at 1.1V when fully populated.
How much heat and power should I expect from the four 64GB RDIMMs running continuously in a server chassis?
Each module draws 1.1V with no heat spreader; the registered architecture offloads the memory controller, keeping thermals and power draw low enough for dense 24/7 server operation.
Does the Supermicro H13DSG-O-CPU require any specific BIOS setting or firmware version to recognise the full 256GB capacity?
The kit is an exact-match upgrade verified for the H13DSG-O-CPU; follow the board manual for supported capacities, approved DIMM population order and installation steps before purchase.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.



