NEMIX RAM
NEMIX RAM DDR5 5600 256GB 4x64GB ECC RDIMM Supermicro H13DSG-O-CPU memory upgrade
A 256GB kit of four 64GB DDR5 5600 ECC registered RDIMMs validated for the Supermicro H13DSG-O-CPU motherboard
- Capacity256GB (4 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 256 GB total capacity across four 64 GB modules
- DDR5-5600 speed with CL46 latency for rated throughput
- Registered ECC architecture corrects single-bit errors on the fly
- 1 V operation matches server memory-controller specifications
- Verified 288-pin RDIMM fitment for Supermicro H13DSG-O-CPU motherboard
256GB DDR5 ECC RDIMM Kit for Supermicro H13DSG-O-CPU
This 256GB kit contains four 64GB DDR5 5600 registered ECC modules built to the exact voltage, rank and timing the Supermicro H13DSG-O-CPU motherboard expects. It installs as a matched set so the server recognises the full capacity at rated speed.
Who this suits and who should look elsewhere
Suits administrators upgrading a Supermicro H13DSG-O-CPU platform that requires 288-pin registered DDR5 with ECC. Not suitable for systems that accept only unbuffered UDIMMs, SODIMM form factors, or a different DDR generation.
Registered ECC architecture with 2Rx4 organisation
The 2Rx4 registered ECC design offloads the memory controller and corrects single-bit errors, allowing all four slots to run fully populated at 5600 MT/s without data corruption.
Høydepunkter
- 256 GB total capacity across four 64 GB modules
- DDR5-5600 speed with CL46 latency for rated throughput
- Registered ECC architecture corrects single-bit errors on the fly
- 1 V operation matches server memory-controller specifications
- Verified 288-pin RDIMM fitment for Supermicro H13DSG-O-CPU motherboard
Spesifikasjoner
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-924K4 |
| Capacity | 256GB (4 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 4X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Spørsmål om denne varen
Will the 256GB kit run at DDR5 5600 with CL46 when all four slots of the Supermicro H13DSG-O-CPU are populated?
The kit is spec-matched to the motherboard's memory-population rules so the registered 2Rx4 modules operate at DDR5 5600 (PC5-44800) with CL46 at 1.1V when fully populated.
How much heat and power should I expect from the four 64GB RDIMMs running continuously in a server chassis?
Each module draws 1.1V with no heat spreader; the registered architecture offloads the memory controller, keeping thermals and power draw low enough for dense 24/7 server operation.
Does the Supermicro H13DSG-O-CPU require any specific BIOS setting or firmware version to recognise the full 256GB capacity?
The kit is an exact-match upgrade verified for the H13DSG-O-CPU; follow the board manual for supported capacities, approved DIMM population order and installation steps before purchase.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.



