Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

NEMIX RAM

NEMIX RAM ME44800-328K2 64GB (2x32GB) DDR5 5600 CL46 ECC UDIMM memory upgrade

SKU CH-GKPW-DX71M

64 GB DDR5 ECC UDIMM kit running at 5600 MHz with CL46 timing for Supermicro X13SAW-TLN4F motherboards

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

  • Exact-match DDR5-5600 kit installs at rated speed without tuning
  • 64 GB ECC UDIMM corrects single-bit errors to protect data integrity
  • Two 32 GB modules populate both channels for full bandwidth
  • 1 V operation matches board spec for stable low-power use
  • Validated for Supermicro X13SAW-TLN4F so it posts on first boot

Exact-match DDR5 kit for Supermicro X13SAW-TLN4F

This 64GB kit contains two 32GB DDR5 ECC UDIMM modules rated at 5600 MT/s with CL46 latency and 1.10V operation. It is built for the Supermicro X13SAW-TLN4F motherboard and matches the board's required 288-pin unbuffered ECC form factor.

DDR5-5600 JEDEC standard limits overclocking

The modules run at the base DDR5-5600 (PC5-44800) speed defined by the JEDEC standard. No XMP or EXPO profiles are included, so the memory operates at its rated 5600 MT/s without manual tuning or voltage increases beyond 1.10V.

2Rx8 dual-rank organisation affects maximum

Each 32GB module uses a 2Rx8 configuration. Builders who need higher total capacity must verify the motherboard's supported ranks per channel and maximum DIMM population before adding more kits.

Privalumai

  • Exact-match DDR5-5600 kit installs at rated speed without tuning
  • 64 GB ECC UDIMM corrects single-bit errors to protect data integrity
  • Two 32 GB modules populate both channels for full bandwidth
  • 1 V operation matches board spec for stable low-power use
  • Validated for Supermicro X13SAW-TLN4F so it posts on first boot

Specifikacijos

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Should I pick the 64GB (2 x 32GB) kit or a single 32GB module for my Supermicro X13SAW-TLN4F?

The 64GB kit provides two matched 32GB UDIMMs so the board can run in dual-channel mode, which doubles memory throughput compared with a single stick.

What does the 5600MHz rating deliver once the modules are installed in the Supermicro X13SAW-TLN4F?

The motherboard's memory controller will clock the kit at DDR5 5600, giving a peak transfer rate of 44800 MB/s per module with CL46 latency at the standard 1.10V.

The product lists a 288-pin DDR5 ECC UDIMM interface; what does that cap in practice?

The 288-pin UDIMM form factor limits you to unbuffered ECC modules; registered RDIMMs or SODIMMs will not fit, and the board's memory population rules determine the maximum total capacity.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.