Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Two green DDR5 UDIMM modules without heat spreaders, 64GB kit

NEMIX RAM

NEMIX RAM ME44800-328K2 64GB (2x32GB) DDR5 5600 CL46 ECC UDIMM memory upgrade

SKU CH-GKPW-DX71M

64 GB DDR5 ECC UDIMM kit running at 5600 MHz with CL46 timing for Supermicro X13SAW-TLN4F motherboards

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

  • Exact-match DDR5-5600 kit installs at rated speed without tuning
  • 64 GB ECC UDIMM corrects single-bit errors to protect data integrity
  • Two 32 GB modules populate both channels for full bandwidth
  • 1 V operation matches board spec for stable low-power use
  • Validated for Supermicro X13SAW-TLN4F so it posts on first boot

Exact-match DDR5 kit for Supermicro X13SAW-TLN4F

This 64GB kit contains two 32GB DDR5 ECC UDIMM modules rated at 5600 MT/s with CL46 latency and 1.10V operation. It is built for the Supermicro X13SAW-TLN4F motherboard and matches the board's required 288-pin unbuffered ECC form factor.

DDR5-5600 JEDEC standard limits overclocking

The modules run at the base DDR5-5600 (PC5-44800) speed defined by the JEDEC standard. No XMP or EXPO profiles are included, so the memory operates at its rated 5600 MT/s without manual tuning or voltage increases beyond 1.10V.

2Rx8 dual-rank organisation affects maximum

Each 32GB module uses a 2Rx8 configuration. Builders who need higher total capacity must verify the motherboard's supported ranks per channel and maximum DIMM population before adding more kits.

Prednosti

  • Exact-match DDR5-5600 kit installs at rated speed without tuning
  • 64 GB ECC UDIMM corrects single-bit errors to protect data integrity
  • Two 32 GB modules populate both channels for full bandwidth
  • 1 V operation matches board spec for stable low-power use
  • Validated for Supermicro X13SAW-TLN4F so it posts on first boot

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Should I pick the 64GB (2 x 32GB) kit or a single 32GB module for my Supermicro X13SAW-TLN4F?

The 64GB kit provides two matched 32GB UDIMMs so the board can run in dual-channel mode, which doubles memory throughput compared with a single stick.

What does the 5600MHz rating deliver once the modules are installed in the Supermicro X13SAW-TLN4F?

The motherboard's memory controller will clock the kit at DDR5 5600, giving a peak transfer rate of 44800 MB/s per module with CL46 latency at the standard 1.10V.

The product lists a 288-pin DDR5 ECC UDIMM interface; what does that cap in practice?

The 288-pin UDIMM form factor limits you to unbuffered ECC modules; registered RDIMMs or SODIMMs will not fit, and the board's memory population rules determine the maximum total capacity.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.