Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small rectangular blower fan in two-tone finish with three-pin connector

OEM Industries

OEM Industries AD0405HX-TB3 JR6 5V 0.5A 3 Pin Blower Fan for Fujitsu LifeBook P3010

SKU CH-907M-PMHHM

5 V blower fan with hydraulic bearing and three-pin connector fits Fujitsu LifeBook P3010

  • Color2-Tone
  • TypeFan only
  • Bearing TypeHydraulic
  • Power Connector3 Pin
  • LEDNo
  • Blower design targets airflow directly over heatsink fins
  • Hydraulic bearing reduces friction for quieter operation
  • 5 V 0.5 A power draw matches original laptop specification
  • Three-pin connector enables motherboard speed monitoring
  • Built for Fujitsu LifeBook P3010 as CP465409-01 replacement

Replacement Blower for Fujitsu LifeBook P3010

This OEM Industries blower fan is built as a direct drop-in for the Fujitsu LifeBook P3010 notebook. It matches the original CP465409-01 specification and uses a 5V 0.5A three-pin power connector. The hydraulic bearing keeps noise low during extended use.

Hydraulic bearing and three-pin control

The hydraulic bearing reduces friction compared with basic sleeve designs, giving smoother spin-up and longer service life. A three-wire connector supplies power, ground and a tachometer signal so the system can monitor fan speed. No LED lighting is fitted, keeping the assembly plain for business environments.

Compact two-tone housing for tight chassis

The two-tone blower housing directs airflow across the heatsink in the narrow ducting of the LifeBook P3010. Its three-pin plug fits the motherboard header without adapters, and the 5V 0.5A rating stays within the notebook's power budget. Buyers needing a different voltage, a four-pin PWM connector or a larger frame will need a different cooler.

Privalumai

  • Blower design targets airflow directly over heatsink fins
  • Hydraulic bearing reduces friction for quieter operation
  • 5 V 0.5 A power draw matches original laptop specification
  • Three-pin connector enables motherboard speed monitoring
  • Built for Fujitsu LifeBook P3010 as CP465409-01 replacement

Specifikacijos

ModelAD0405HX-TB3
Color2-Tone
TypeFan only
Bearing TypeHydraulic
Power Connector3 Pin
LEDNo

Klausimai apie šią prekę

How long does the hydraulic bearing in this blower fan typically last before replacement?

The hydraulic bearing is designed for extended service in notebook cooling; replacement is only needed if noise or airflow drops noticeably.

What is the maximum current draw of the AD0405HX-TB3 JR6 when the LifeBook P3010 runs sustained heavy loads?

The fan is rated at .5 A on the 5 V rail, so that is the peak draw even under continuous operation.

How much noise and heat does this 3-pin blower produce when the laptop is used all day?

With a hydraulic bearing and no LED, the unit runs quietly; waste heat is limited to the 5 V × .5 A input power.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.