نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Small rectangular blower fan in two-tone finish with three-pin connector

OEM Industries

OEM Industries AD0405HX-TB3 JR6 5V 0.5A 3 Pin Blower Fan for Fujitsu LifeBook P3010

SKU CH-907M-PMHHM

5 V blower fan with hydraulic bearing and three-pin connector fits Fujitsu LifeBook P3010

  • Color2-Tone
  • TypeFan only
  • Bearing TypeHydraulic
  • Power Connector3 Pin
  • LEDNo
  • Blower design targets airflow directly over heatsink fins
  • Hydraulic bearing reduces friction for quieter operation
  • 5 V 0.5 A power draw matches original laptop specification
  • Three-pin connector enables motherboard speed monitoring
  • Built for Fujitsu LifeBook P3010 as CP465409-01 replacement

Replacement Blower for Fujitsu LifeBook P3010

This OEM Industries blower fan is built as a direct drop-in for the Fujitsu LifeBook P3010 notebook. It matches the original CP465409-01 specification and uses a 5V 0.5A three-pin power connector. The hydraulic bearing keeps noise low during extended use.

Hydraulic bearing and three-pin control

The hydraulic bearing reduces friction compared with basic sleeve designs, giving smoother spin-up and longer service life. A three-wire connector supplies power, ground and a tachometer signal so the system can monitor fan speed. No LED lighting is fitted, keeping the assembly plain for business environments.

Compact two-tone housing for tight chassis

The two-tone blower housing directs airflow across the heatsink in the narrow ducting of the LifeBook P3010. Its three-pin plug fits the motherboard header without adapters, and the 5V 0.5A rating stays within the notebook's power budget. Buyers needing a different voltage, a four-pin PWM connector or a larger frame will need a different cooler.

أبرز المميزات

  • Blower design targets airflow directly over heatsink fins
  • Hydraulic bearing reduces friction for quieter operation
  • 5 V 0.5 A power draw matches original laptop specification
  • Three-pin connector enables motherboard speed monitoring
  • Built for Fujitsu LifeBook P3010 as CP465409-01 replacement

المواصفات

ModelAD0405HX-TB3
Color2-Tone
TypeFan only
Bearing TypeHydraulic
Power Connector3 Pin
LEDNo

أسئلة حول هذا المنتج

How long does the hydraulic bearing in this blower fan typically last before replacement?

The hydraulic bearing is designed for extended service in notebook cooling; replacement is only needed if noise or airflow drops noticeably.

What is the maximum current draw of the AD0405HX-TB3 JR6 when the LifeBook P3010 runs sustained heavy loads?

The fan is rated at .5 A on the 5 V rail, so that is the peak draw even under continuous operation.

How much noise and heat does this 3-pin blower produce when the laptop is used all day?

With a hydraulic bearing and no LED, the unit runs quietly; waste heat is limited to the 5 V × .5 A input power.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.