OEM Industries
OEM Industries CF-05407S 40mm 7mm 5V 0.18A 2-pin CPU cooler
A 40 mm sleeve-bearing fan runs at 5 V and .18 A through a 2-pin connector for notebook CPU cooling
- ColorBlack
- TypeFan only
- Fan Size40mm
- Bearing TypeSleeve Bearing
- Power Connector2 Pin
- LEDNo
- Compact 40 mm frame fits tight notebook bays
- Low 5 V 0.18 A draw reduces battery load
- Sleeve bearing runs quietly for daily use
- Two-pin connector enables simple motherboard control
- Black finish blends with internal components
Compact 40 mm notebook fan
The OEM Industries CF-05407S is a 40 mm square fan built for tight notebook and small-form-factor chassis. It draws 0.18 A at 5 V through a two-pin connector and uses a sleeve bearing for quiet operation. No LED lighting is included.
5 V 0.18 A power envelope
At 5 V and 0.18 A the fan delivers modest airflow suited to low-TDP processors or auxiliary cooling spots. It cannot sustain high static pressure, so it runs out of headroom on sustained heavy loads or in poorly ventilated enclosures.
Two-pin simplicity
The two-pin lead provides power only, meaning speed control depends on the host board's voltage regulation. No PWM signal wire is present, so automatic fan curves are not supported. The bundle contains only the fan unit itself.
Privalumai
- Compact 40 mm frame fits tight notebook bays
- Low 5 V 0.18 A draw reduces battery load
- Sleeve bearing runs quietly for daily use
- Two-pin connector enables simple motherboard control
- Black finish blends with internal components
Specifikacijos
| Model | CF-05407S |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 40mm |
| Bearing Type | Sleeve Bearing |
| Power Connector | 2 Pin |
| LED | No |
Klausimai apie šią prekę
Will the 40 mm frame and 7 mm thickness fit the mounting holes on my older notebook heatsink?
The fan measures 40 mm square and 7 mm thick, matching the CF-05407S form factor used in many legacy notebook coolers; verify your heatsink screw spacing before installing.
How can I confirm the 5 V 0.18 A sleeve-bearing fan is spinning correctly after I connect the 2-pin header?
Power the system and listen for smooth rotation; the 2-pin connector supplies 5 V at 0.18 A, so the fan should start immediately and run without rattling from the sleeve bearing.
Does the package include only the bare 40 mm fan or are mounting screws and a heatsink also supplied?
The item is listed as fan only — a black 40 mm sleeve-bearing unit with 2-pin cable — so you will need to reuse or source screws and any heatsink separately.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



