暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small black 40mm notebook cooling fan with 2-pin connector

OEM Industries

OEM Industries CF-05407S 40mm 7mm 5V 0.18A 2-pin CPU cooler

SKU CH-1V88-MPC8Y

A 40 mm sleeve-bearing fan runs at 5 V and .18 A through a 2-pin connector for notebook CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • LEDNo
  • Compact 40 mm frame fits tight notebook bays
  • Low 5 V 0.18 A draw reduces battery load
  • Sleeve bearing runs quietly for daily use
  • Two-pin connector enables simple motherboard control
  • Black finish blends with internal components

Compact 40 mm notebook fan

The OEM Industries CF-05407S is a 40 mm square fan built for tight notebook and small-form-factor chassis. It draws 0.18 A at 5 V through a two-pin connector and uses a sleeve bearing for quiet operation. No LED lighting is included.

5 V 0.18 A power envelope

At 5 V and 0.18 A the fan delivers modest airflow suited to low-TDP processors or auxiliary cooling spots. It cannot sustain high static pressure, so it runs out of headroom on sustained heavy loads or in poorly ventilated enclosures.

Two-pin simplicity

The two-pin lead provides power only, meaning speed control depends on the host board's voltage regulation. No PWM signal wire is present, so automatic fan curves are not supported. The bundle contains only the fan unit itself.

特長

  • Compact 40 mm frame fits tight notebook bays
  • Low 5 V 0.18 A draw reduces battery load
  • Sleeve bearing runs quietly for daily use
  • Two-pin connector enables simple motherboard control
  • Black finish blends with internal components

仕様

ModelCF-05407S
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeSleeve Bearing
Power Connector2 Pin
LEDNo

この商品に関する質問

Will the 40 mm frame and 7 mm thickness fit the mounting holes on my older notebook heatsink?

The fan measures 40 mm square and 7 mm thick, matching the CF-05407S form factor used in many legacy notebook coolers; verify your heatsink screw spacing before installing.

How can I confirm the 5 V 0.18 A sleeve-bearing fan is spinning correctly after I connect the 2-pin header?

Power the system and listen for smooth rotation; the 2-pin connector supplies 5 V at 0.18 A, so the fan should start immediately and run without rattling from the sleeve bearing.

Does the package include only the bare 40 mm fan or are mounting screws and a heatsink also supplied?

The item is listed as fan only — a black 40 mm sleeve-bearing unit with 2-pin cable — so you will need to reuse or source screws and any heatsink separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。