Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small black 35mm square cooling fan with two-wire connector

OEM Industries

OEM Industries CF-12357S 35mm 12V 0.14A 2-pin fan

SKU CH-ATFH-ANJNQ

Compact 35 mm sleeve-bearing fan runs on 12 V at 0.14 A with a two-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size35mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • LEDNo
  • Compact 35 mm frame fits tight GPU coolers
  • 12 V 0.14 A draw keeps power use low
  • Sleeve bearing runs quietly at low speed
  • Two-pin connector plugs straight into legacy headers
  • Black fan-only design suits custom cooling builds

Compact VGA cooler replacement

The OEM Industries CF-12357S is a 35 mm square fan designed to mount on graphics card heatsinks or small-form-factor CPU coolers. It runs on 12 V drawing .14 A through a standard two-pin connector and uses a sleeve bearing for quiet operation at low speeds.

Suits tight clearance builds

Builders refreshing a vintage GPU cooler or assembling a slim HTPC chassis will appreciate the minimal 35 mm footprint and simple two-wire power. Systems that require PWM speed control, higher static pressure or larger airflow volumes should look at bigger frame sizes instead.

Low-profile airflow headroom

At 35 mm the fan moves enough air for light thermal loads such as entry-level graphics cards or passive heatsink assist. It runs out of capacity on mid-range or high-end GPUs where heatpipes demand greater static pressure and volumetric flow.

Privalumai

  • Compact 35 mm frame fits tight GPU coolers
  • 12 V 0.14 A draw keeps power use low
  • Sleeve bearing runs quietly at low speed
  • Two-pin connector plugs straight into legacy headers
  • Black fan-only design suits custom cooling builds

Specifikacijos

ModelCF-12357S
ColorBlack
TypeFan only
Fan Size35mm
Bearing TypeSleeve Bearing
Power Connector2 Pin
LEDNo

Klausimai apie šią prekę

Does this 35 mm CF-12357S fan need a 12 V 2-pin header on the graphics card or motherboard?

Yes, it draws 0.14 A from a 12 V 2-pin connector, so the board or GPU must provide that header.

Can I run this sleeve-bearing fan on an older system that only has 3-pin or 4-pin fan sockets?

A 2-pin plug fits the first two pins of a 3-pin or 4-pin header; the fan will run at full 12 V speed without PWM control.

How do I confirm the CF-12357S is spinning correctly after installation?

Power on the system and visually check that the 35 mm blades rotate steadily; you can also verify RPM in BIOS or monitoring software.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.