Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Small black 35mm square cooling fan with two-wire connector

OEM Industries

OEM Industries CF-12357S 35mm 12V 0.14A 2-pin fan

SKU CH-ATFH-ANJNQ

Compact 35 mm sleeve-bearing fan runs on 12 V at 0.14 A with a two-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size35mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • LEDNo
  • Compact 35 mm frame fits tight GPU coolers
  • 12 V 0.14 A draw keeps power use low
  • Sleeve bearing runs quietly at low speed
  • Two-pin connector plugs straight into legacy headers
  • Black fan-only design suits custom cooling builds

Compact VGA cooler replacement

The OEM Industries CF-12357S is a 35 mm square fan designed to mount on graphics card heatsinks or small-form-factor CPU coolers. It runs on 12 V drawing .14 A through a standard two-pin connector and uses a sleeve bearing for quiet operation at low speeds.

Suits tight clearance builds

Builders refreshing a vintage GPU cooler or assembling a slim HTPC chassis will appreciate the minimal 35 mm footprint and simple two-wire power. Systems that require PWM speed control, higher static pressure or larger airflow volumes should look at bigger frame sizes instead.

Low-profile airflow headroom

At 35 mm the fan moves enough air for light thermal loads such as entry-level graphics cards or passive heatsink assist. It runs out of capacity on mid-range or high-end GPUs where heatpipes demand greater static pressure and volumetric flow.

Poudarki

  • Compact 35 mm frame fits tight GPU coolers
  • 12 V 0.14 A draw keeps power use low
  • Sleeve bearing runs quietly at low speed
  • Two-pin connector plugs straight into legacy headers
  • Black fan-only design suits custom cooling builds

Specifikacije

ModelCF-12357S
ColorBlack
TypeFan only
Fan Size35mm
Bearing TypeSleeve Bearing
Power Connector2 Pin
LEDNo

Vprašanja o tem izdelku

Does this 35 mm CF-12357S fan need a 12 V 2-pin header on the graphics card or motherboard?

Yes, it draws 0.14 A from a 12 V 2-pin connector, so the board or GPU must provide that header.

Can I run this sleeve-bearing fan on an older system that only has 3-pin or 4-pin fan sockets?

A 2-pin plug fits the first two pins of a 3-pin or 4-pin header; the fan will run at full 12 V speed without PWM control.

How do I confirm the CF-12357S is spinning correctly after installation?

Power on the system and visually check that the 35 mm blades rotate steadily; you can also verify RPM in BIOS or monitoring software.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.