Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 60mm square fan with 3-pin connector, 25mm thick

OEM Industries

OEM Industries D06F-12SM 60mm 3-Pin CPU Cooler

SKU CH-7NBT-N3HDA

Compact 60 mm 3-pin CPU fan runs at 12 V and 0.10 A for targeted cooling

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Power Connector3 Pin
  • LEDNo
  • Nidec motor ensures reliable 60 mm airflow
  • 12 V 0.10 A design keeps power draw low
  • 3-pin connector enables direct motherboard control
  • Compact 60 × 25 mm frame fits tight builds
  • Blower-style fan directs air over CPU heatsink

Compact 60mm cooler for tight builds

The OEM Industries D06F-12SM is a 60mm square fan designed to mount directly onto low-profile CPU heatsinks or small-form-factor chassis. It draws 12V at 0.10A through a standard three-pin connector, making it a straightforward replacement for the original blower on compatible Nidec 6025 assemblies. The black frame and blade colour keep the look neutral inside any case.

Steady airflow within a fixed power envelope

Because the motor is rated for a constant 0.10A at 12 volts, the fan delivers a consistent airflow volume without the current spikes seen in higher-wattage models. The three-wire connection allows the motherboard to monitor RPM, so the system can maintain a stable acoustic profile during extended workloads rather than ramping unpredictably. No LED lighting means no extra current draw or visual distraction in server or workstation environments.

Verify mounting holes

Measure the existing heatsink or chassis cut-out to confirm a 60mm by 60mm footprint with 25mm thickness matches the D06F-12SM dimensions. Ensure the motherboard or fan controller provides a three-pin header; a four-pin PWM header will run the fan at full speed without speed control. Check that the replacement’s three-wire pinout aligns with the original Nidec 6025 connector to avoid reversed polarity.

Privalumai

  • Nidec motor ensures reliable 60 mm airflow
  • 12 V 0.10 A design keeps power draw low
  • 3-pin connector enables direct motherboard control
  • Compact 60 × 25 mm frame fits tight builds
  • Blower-style fan directs air over CPU heatsink

Specifikacijos

ModelD06F-12SM
ColorBlack
TypeFan only
Fan Size60mm
Power Connector3 Pin
LEDNo

Klausimai apie šią prekę

How loud does the 60mm D06F-12SM run when it spins all day?

The fan is a Nidec 6025 blower rated at 12V and 0.10A, so it draws only 3 watts and stays quiet during continuous operation.

What motherboard header do I need to plug the 3-pin connector into?

A standard 3-pin fan header on the motherboard supplies the 12V power and tachometer signal the cooler requires.

Will the 60mm frame clear tall RAM modules on an older board?

The compact 60 by 25mm size leaves plenty of room around the socket, so it fits alongside taller DIMMs on legacy platforms.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.