Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black 60mm square fan with 3-pin connector, 25mm thick

OEM Industries

OEM Industries D06F-12SM 60mm 3-Pin CPU Cooler

SKU CH-7NBT-N3HDA

Compact 60 mm 3-pin CPU fan runs at 12 V and 0.10 A for targeted cooling

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Power Connector3 Pin
  • LEDNo
  • Nidec motor ensures reliable 60 mm airflow
  • 12 V 0.10 A design keeps power draw low
  • 3-pin connector enables direct motherboard control
  • Compact 60 × 25 mm frame fits tight builds
  • Blower-style fan directs air over CPU heatsink

Compact 60mm cooler for tight builds

The OEM Industries D06F-12SM is a 60mm square fan designed to mount directly onto low-profile CPU heatsinks or small-form-factor chassis. It draws 12V at 0.10A through a standard three-pin connector, making it a straightforward replacement for the original blower on compatible Nidec 6025 assemblies. The black frame and blade colour keep the look neutral inside any case.

Steady airflow within a fixed power envelope

Because the motor is rated for a constant 0.10A at 12 volts, the fan delivers a consistent airflow volume without the current spikes seen in higher-wattage models. The three-wire connection allows the motherboard to monitor RPM, so the system can maintain a stable acoustic profile during extended workloads rather than ramping unpredictably. No LED lighting means no extra current draw or visual distraction in server or workstation environments.

Verify mounting holes

Measure the existing heatsink or chassis cut-out to confirm a 60mm by 60mm footprint with 25mm thickness matches the D06F-12SM dimensions. Ensure the motherboard or fan controller provides a three-pin header; a four-pin PWM header will run the fan at full speed without speed control. Check that the replacement’s three-wire pinout aligns with the original Nidec 6025 connector to avoid reversed polarity.

Poudarki

  • Nidec motor ensures reliable 60 mm airflow
  • 12 V 0.10 A design keeps power draw low
  • 3-pin connector enables direct motherboard control
  • Compact 60 × 25 mm frame fits tight builds
  • Blower-style fan directs air over CPU heatsink

Specifikacije

ModelD06F-12SM
ColorBlack
TypeFan only
Fan Size60mm
Power Connector3 Pin
LEDNo

Vprašanja o tem izdelku

How loud does the 60mm D06F-12SM run when it spins all day?

The fan is a Nidec 6025 blower rated at 12V and 0.10A, so it draws only 3 watts and stays quiet during continuous operation.

What motherboard header do I need to plug the 3-pin connector into?

A standard 3-pin fan header on the motherboard supplies the 12V power and tachometer signal the cooler requires.

Will the 60mm frame clear tall RAM modules on an older board?

The compact 60 by 25mm size leaves plenty of room around the socket, so it fits alongside taller DIMMs on legacy platforms.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.